Do you have a question about the Fold-N-Stow and is the answer not in the manual?
Questions and answers
Summary of Contents for squatty potty Fold-N-Stow
Page 1
Fold-N-Stow Assembly If your stool was mishandled in shipping, one or both of the side legs may have become disconnected from the stool. DO NOT worry. This is simple to fix. You won’t need any tools. You just need a bit of patience to follow...
Page 2
Rubber Foot 1. Lay the opened Fold-N-Stow Stool down with the top of the stool touching the ground. (Note: the top of the stool is the side with the tread lines.) 2. Place the detached legs into proper position (the latch facing down, and the rubber foot facing inward.
Page 3
Slide into hinges 4. Attach one part of the leg at a time, by sliding the 3 hinge holes over the 3 hinge pins on the side. 5. Attach the other part of the leg on the other 3 hinge pins. 6.
Page 4
Hinge Pin Hinge Pin 8. Open the stool back up, making sure the 6 leg hinge holes remain in place on each of the 6 hinge pins. (Note the side hinges from both of the pieces should line up.) 9. Lock the 2 hinge pieces in place by firmly snapping them together.
Page 5
Please call (855) 628-1099 our customer service desk if you have any problems or issues with this reassembly. We apologize again for any inconvenience you experienced from mishandling during shipment of your Squatty Potty Fold-N-Stow. Thank you for being a loyal Squatty Potty fan.
Need help?
Do you have a question about the Fold-N-Stow and is the answer not in the manual?
Questions and answers