Advertisement
Charge the device before use. Use the MicroUSB cable (7) supplied.
The red LED indicates that it is charging. When the blue LED comes on, charging is complete.
If pairing is unsuccessful, turn the unit off and try again.
if the device or the phone have been turned off or are out of range, you may need to use the menu on your phone to pair them again; or, just press the MF button (1) once.
Hold down the MF button (1) until the LED (6) lights up blue (around 5 seconds).
Hold down the MF button (1) until the LED (6) flashes red (around 5 seconds).
Answering a call: Briefly press the MFB button (1).
Ending a call: Briefly press the MFB button (1).
Answering an incoming call and ending the current one in the multipoint mode:briefly press the MFB button (1).
Rejecting an incoming call and continuing the current call in multipoint mode:briefly press the MFB button (1) twice.
Play/Pause: press the MF button (1)
Rew: press and hold down the -/Rew button (2)
FF: press and hold the +/FF button (3)
To adjust the volume: press the Volume + or Volume - buttons (2 or 3) briefly.
Low battery indicator: a flashing red LED indicates that the battery capacity is low.
Bluetooth®: v4.1
Frequency: 2.402GHz to 2.480GHz
Profiles supported: Headset - Handsfree - A2DP - AVRCP
Range: 10m
Talk Time: about 13h
Music Time: about 9h
Standby Time: about 83h
Recharge Time: about 2h
MicroUSB port Voltage: 5V DC
MicroUSB port current: ≤110mA
Battery Voltage: 3.7V
Battery Capacity: 160mAh
ERP power: 6dBm
Weight: 20g
Via Lambrakis 1/A, 42122 Reggio Emilia, Italy
www.cellularline.com;
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download AQL COLLAR - Ultra-Light Neckband Style Headphones Instructions
Advertisement
Need help?
Do you have a question about the COLLAR and is the answer not in the manual?
Questions and answers