Advertisement
WHD-PRO2T-K is an ideal solution for Bring Your Own Device (BYOD) meeting.
It supports multiple platforms including iOS, Android, Mac, and Windows operating systems for productive and flexible presentations and collaboration from individual devices.
It also enables powerful 2 way split-screen sharing, making it useful and for ideas sharing and on-screen comparisons.
A wireless connection to a shared display from participants' seats will also remove the need for complex configuring and cabling.
You can share BYOD content effortlessly with just one click in huddle rooms and many other types of meeting spaces
Top | I/O Descriptions | LED Indication |
Top | I/O Descriptions | LED Indication |
Activate Host Standby w/o source input | Activate Guest Standby w/o source input | ||
Activate Host & in projecting | Host received request of projection | ||
Guest standby w/o projecting | Host standby w/o projecting | ||
Guest send request of projection and wait for allow |
| ||
Activate Guest & in projecting | Pairing done | ||
Transmitter OTA Completed | Transmitter OTA Fail |
Step 1: Use the HDMI A-A cable connect with WHD-PRO2T-K Transmitter and Source device (Laptop, Notebook)
Step 2: Connect the USB power cable of WHD-PRO2T-K Transmitter to the USB port of Notebook.
Step 3: Use HDMI cable to connect the HDMI OUT of WHD-PRO2T-K receiver to a display device (HDTV, Projector).
Step 4: Connect DC 5V/2A power adaptor to the Power Jack of WHD-PRO2T-K Receiver.
Step 5: Connection completed. When the receiver and transmitter are ready simply press the main button on the transmitter to mirror your device. Single click for mirror or disconnect.
Note: The receiver and transmitters have finished the pairing setup before delivery. If no video signal on your display, Please do the pairing Setup again by Plugging in transmitter's USB cable to receiver USB port. (Follow the pairing instructions described in Pairing of TX and RX)
For second transmitter (optional) connection, please follow step 1 & 2.
Notice: If the HDMI cable is not long enough, please use extension cable to ensure the connection.
Main Button (Mirror button) | Host | Guest |
Single click | Mirror/Disconnect | Send mirror request |
Hold for 3 seconds | Full screen mirror | Send full screen mirror request |
Side button (control button) | Host | Guest |
Single click | Allow guest to mirror | — |
Double click | Deny request | — |
Hold for 3 seconds | Quit all display | — |
When WHD-PRO2T-K RX is successfully turned on, the screen will be shown on display
*Outbound link can select only one of Wi-Fi and RJ45 wire line (LAN).
The receiver is connected to a screen or projector via HDMI for a wireless presentation. You can also cast your content via WiFi display.
Use your device's own built-in screen mirroring function. You do not require the WHD-PRO2T-K transmitter. Connect with WHD-PRO2T-K RX with SSID & Password directly.
*WHD-PRO2T-K RX IP- when Devices (either laptops or mobile phones) connect with WHD-PRO2T-K RX with SSID & Password first, applying the IP in web browser can enter Admin setting page for more advance setting.
No. | Problem | Solution |
1. | No video output |
|
2. | Transmitter failed to start up or turns on and off repeatedly |
|
3. | Your screen is not shown on the display when pressing the bottom. |
|
4. | Poor Wi-Fi connectivity |
|
Output Resolution | 1920x1080@60Hz |
I/O | HDMI out USB type A DC 5V Ethernet |
WiFi | 802.11ac |
WiFi Frequency | 5Ghz: 5.150Ghz~5.825Ghz |
Power | RX:DC 5V, 2A / TX:5V, 0.9A |
HDCP | HDCP1.3 |
Ethernet | 10/100/1000M |
LED Indication | Power, Ethernet, WiFi status, USB |
Key | Reset button |
Power Consumption | 10W max. |
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download OREI WHD-PRO2T-K - HD Wireless Presentation System Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the WHD-PRO2T-K that isn't answered in the manual? Leave your question here.