Miller Electric RFC-23A Owner's Manual

OWNER'S MANUAL
RFC-23A Remote Foot Control
1.

Safety Symbol Definitions

DANGER! − Indicates a hazardous situation which, if not
avoided, will result in death or serious injury. The pos-
sible hazards are shown in the adjoining symbols or
explained in the text.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury. The possible ha-
zards are shown in the adjoining symbols or explained in
the text.
NOTICE Indicates statements not related to personal injury.
Indicates special instructions.
Beware of electric shock from wiring. Disconnect input
power before installing this kit. Reinstall all panels and
covers.
CALIFORNIA PROPOSITION 65 WARNINGS
Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and,
in some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)
This product contains chemicals, including lead, known to the state of California to cause cancer, birth defects, or other reproductive harm.
Wash hands after use.
2.

Specifications And Connections

A
B
A 7-1/2 in.
(190 mm)
B 6-1/4 in.
(159 mm)
C 11 in.
(279 mm)
C
FORM: OM-826
2010−10
Arc rays can burn eyes and skin − wear a welding hel-
met with correct filter, and cover exposed skin with non-
flammable clothing.
Wear safety glasses with side shields.
Welding sparks can cause fire or explosion. Move flam-
mables away. Do not weld on closed tanks or barrels −
they can explode. Clean tanks or barrels properly.
Breathing welding fumes and gases can harm your
health. Welding requires good ventilation. If ventilation is
impossible, such as when welding in a confined space,
use an air-supplied respirator.
1
Units are equipped with 20 ft (6 m)
cord(s). If a longer cord is required
see Section 3.
1
029 900V
Twistlock Plugs
Ref. 141 294-A / 800 096

2010 MILLER Electric Mfg. Co.