Table of Contents
Advertisement
The MENU key operates the same as the
MENU or OSD (On Screen Display) key on
your original remote. Use
,
(Menu Up, Down, Left and Right) to navigate
your menus. If your original remote control had
a SELECT key to select options in your menus,
use SEL. Use the EXIT key to exit/clear your
On-Screen menus. Please consult your home
entertainment component's original owner's
manual for more detailed instructions on
accessing and navigating your On-Screen
menus.
The
,
,
, and
(Menu Up, Down, Left
and Right) keys are used to navigate your On-
Screen menus. The
,
,
, and
control the following functions in other modes:
RCVR and DVD/LD, RCVR, CD OR CABLE/SAT
mode = Rear Level +/- and Balance Left/Right,
CD mode = Track+/- and Disc +/-.
The SEL (Select) key selects options in your
On-Screen menus. The SEL key also controls
the following functions in other modes: RCVR
and DVD/LD, RCVR, CD OR CABLE/SAT
mode = Surround Mode, CD mode = Disc
Select, DVD/LD mode = Chapter.
The EXIT key exits or clears your on-screen
menus. The EXIT key also controls the
following functions in other modes: RCVR,
DVD/LD, RCVR, CD OR CABLE/SAT and CD
mode = Open/Close.
The PROG/GUIDE key operates your compo-
nents secondary menus as well as your DBS
system's and Cable Converter's Guide
function. Use the
,
,
, and
Down, Left and Right) keys to navigate your
menus. If your original remote control had a
SELECT key to select options in your menus,
use SEL. Use the EXIT key to exit/clear your
On-Screen menus. Please consult your home
entertainment component's original owner's
manual for more detailed instructions on
accessing and navigating your On-Screen
menus.
The DISPLAY key operates the Display
function of your home entertainment compo-
nents.
The PIP On/Off key accesses your TV's
Picture-in-Picture feature. The PIP On/Off key
also controls the following functions in other
modes: CD mode =Disk Skip, DVD/LD mode =
Subtitle On/Off, CBL/SAT mode = View.
The SWAP key swaps the Picture-in-Picture
window and the TV's main picture. The SWAP
key also controls the following functions in
other modes: CBL/SAT mode = SAT.
The MOVE PIP key moves the Picture-in-
Picture window around your TV screen. The
MOVE PIP key also controls the following
functions in other modes: DVD/LD mode =
Angle, CBL/SAT mode = Next.
The SURROUND key operates the same as the
Surround On/Off key on your original remote. The
SURROUND key also controls the following
functions in other modes: VCR mode = Auto
Tracking, DVD/LD mode = Disc, CBL/SAT mode
= Favorite Channel, CD mode = 10+.
The MACRO and MACRO2 keys can memo-
rize up to 15 keystrokes per key that can be
accessed in sequence with a single key press.
These keys are not mode specific.
,
, and
keys also
(Menu Up,
INSTALLING THE BATTERIES
Your Cinema 6 requires four (4) new AAA alkaline
batteries. To install the batteries:
1.
On the back of the Cinema 6 , pull
back on the tab and lift the battery
cover off.
2.
Match the + and - marks on the
batteries to the + and - marks in the
battery case, then insert the
batteries.
3.
Press the battery cover back into
place.
4.
Test the unit by pressing POWER. If
the batteries are inserted correctly,
the red light will blink.
NOTE: Removing the batteries will not require you to
reprogram your remote control because the Cinema 6 has
unlimited min. memory backup : Allows you time to replace
batteries without having to re-program the remote.
SETTING UP YOUR COMPONENTS
Programming the Cinema 6 to operate your TV:
Locate the brand name of your TV and then write it in the
space below.
TV Brand:
Locate the brand name of your TV in the "Setup Codes
For TVs" section. The brands are listed in alphabetical
order with the most popular codes listed first. You will use
one of these codes to program your Cinema 6 to operate
your TV.
To program the Cinema 6 to operate your TV:
1.
Turn on your TV.
2.
Press TV and release. Press and hold SETUP
until the Cinema 6 's red light blinks twice, then
release SETUP.
3.
Enter the first four-digit TV code listed for your
brand in the "Setup Codes For TVs" section. If
you perform this procedure correctly, the red
light will blink twice when you enter the final
digit of your code.
Aim the Cinema 6 at your TV and press
4.
POWER. Your TV should turn off. If
your TV does not respond, repeat steps 2-4,
trying each code listed for your
brand until you find the one that operates your
TV.
Your Cinema 6 is now programmed to operate
5.
your TV. Write your TV code in
the boxes to the left for future reference.
Remember, if you want to use your Cinema 6 to operate
your TV, press the TV key first.
Advertisement
Table of Contents
