Summary of Contents for ONEFINITY Quick Change Wasteboard Frame Foreman
- Page 1 Installation and Operation Instructions QCW (Quick Change Wasteboard) Frame - Foreman Version...
-
Page 2: Table Of Contents
Contents General Notes Safety Rules Description Anatomy of the QCW Frame Specifications (Foreman Version) Assembly Instructions 13-19 Wasteboard Creation Wasteboard Installation: Secure from Beneath Wasteboard Installation: Secure from Above 22-25 Onefinity Warranty Policy 26-27 Notes Contact Us... -
Page 3: General Notes
General Notes This manual serves to familiarize you with your Onefinity CNC machine and provide all neces- sary information required to operate the machine safely and professionally. Please completely read this manual before the first commissioning of your machine. In order to minimize the risks of injury and/or material damages, please only commission the... -
Page 4: Safety Rules
Safety Rules General Instructions: These operating instructions explain the Onefinity and the correct handling of the CNC sys- tem. Please read these operating instructions and accompanying documents in their entirety before commissioning of the system in order to become familiar with the characteristics and the operation of the product. - Page 5 Protective Measures: The Onefinity has been constructed for advanced users and is only to be operated by techni- cally skilled persons above the age of 16. The CNC gantry milling system as well as associated tools, small parts and electrical components are to be stored outside the reach of children.
- Page 6 Safety Rules Use of the Power Tool: Caution: Do not alter or misuse the tool. Any alteration or modification is a misuse and may result in serious personal injury. Caution: Disconnect the plug from the power source before you make any adjust- ments, change accessories, or store the tool.
- Page 7 Safety Rules Care of the Power Tool: NOTICE: Maintain the tools. Check for misalignment or binding of moving parts, breakage of parts and any other conditions that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
- Page 8 Safety Rules Emergency Stop Switch : The emergency stop is located on the top of the Controller housing. In order to be able to inter- vene at all times, the emergency stop has to be positioned in a suitable place. By pressing the emergency stop switch, the emergency stop is triggered.
- Page 9 Workspace: The workspace needs to provide enough space around the Onefinity CNC for the machine to work comfortably and to be able to fully use its traveling paths. Additionally, a safe distance to possibly nearby positioned machines is to be maintained. The location of the machine as well as the workplace surrounding the machine has to be sufficiently illuminated.
-
Page 10: Description
The machine table may consist of any solid flat surface big enough to mount the Rails and Controller. The Onefinity consists of the following, sometimes optional, components: - Onefinity Woodworker, Machinist; - electronic control... -
Page 11: Anatomy Of The Qcw Frame
Anatomy of the QCW Frame QCW Frame Wasteboard (Not Included) QCW Frame End Outer T-Track Inner T-Track (2 Pieces) (4 Pieces) QCW Frame Tube... -
Page 12: Specifications (Foreman Version)
General Disclaimer: While Onefinity has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, system/component/options availability are all subject to change without notice. Product design specifications and colours are subject to change without notice and may vary from those shown. Errors and omissions excepted. Images displayed... - Page 13 QCW Frame Assembly Instructions The following instructions detail how to assemble the QCW Frame and install your Onefinity CNC Machine. Please read these entire instructions carefully. If you have any problems or do not understand these instructions please contact us at support@onefinitycnc.com or 1-888 717 4242 for further assistance.
-
Page 14: Assembly Instructions
Assembly Instructions The following instructions detail how to install your Onefinity CNC Machine. Please read these entire instructions carefully. If you have any problems or do not understand these instructions please contact us at support@onefinitycnc.com or 1-888 717 4242 for further assistance. - Page 15 Assembly Instructions Step 3: Place the X-Rail (Green Arrow) on the Y-Rails Gantry Blocks (Blue Arrows) Step 4: Adjust Y-Rails (Red Arrows) until the Gantry Assemblies (Green Arrows) are flush with X-Rail Ends (Blue Arrows). Note: It is important that these parts are flush with each other before fastening together.
- Page 16 Assembly Instructions Step 5: Once you have ensured the Y-Axis Gantry Blocks and X-Axis Rails Ends are flush, fasten the front of the X-Rail to the Y-Axis using four (4) X-Rail Mounting Screws (Blue Arrows) Step 6: Fasten the back of the X-Rail to the Y-Axis using the remaining four (4) X-Rail Mount- ing Screws (Green Arrows)
- Page 17 Assembly Instructions Step 7: Fasten the front of the Y-Rails to your QCW Frame using only one (1) Y-Rail Mounting Screw per side (Green Arrow). You will use the remaining screws later. Step 8: After fastening the front Y-Rails, push the X-Rail to the back of the machine as shown below.
- Page 18 Assembly Instructions Step 9: After moving the X-Axis all the way to the back, fasten the back of the Y-Rails to your QCW Frame using only one (1) Y-Rail Mounting Screw per side (Green Arrow). Step 10: We will now finish fastening the front Y-Rails. Push the X-Rail all the way to the front again, finish fastening the Y-Rails to the QCW Frame using another three (3) Y-Rail Mounting screws per side (Green Arrow).
- Page 19 (3) Y-Rail Mounting Screws per side (Green Arrows). Step 12: Congratulations, you have now finished assembling you QWC. To finish assem- bling your Onefinity please follow the steps outlined in the Onefinity Owners Manual which can be found on the support page of our website.
-
Page 20: Wasteboard Creation
A wasteboard is a disposable work surface that will be mounted atop your Onefinity’s perma- nent table. Having a wasteboard is an important part of a CNC and makes using the Onefinity more enjoyable as leveling and workholding becomes easier. The wasteboard is typically MDF and protects the table from damage as well as being an expendable surface. -
Page 21: Wasteboard Installation: Secure From Beneath
QCW Frame Secure from Beneath: Before attaching your Onefinity CNC. After you have assembled your QCW Frame and before you attach your Onefinity CNC you can attached the Waste Board. Important Note: Due to the size and weight of the Foreman, it is... -
Page 22: Wasteboard Installation: Secure From Above
Wasteboard Creation: Secure from Above QCW Frame Secure from Above: After you have assembled your QCW Frame and installed your Onefinity CNC you can attached the wasteboard. Below are steps illustrating how to create and install you Secure from Above Wasteboard. - Page 23 Wasteboard Creation and Installations Step 3: Using your Tape Measure and Pencil, mark the holes shown below on your Left Side Piece. After you have marked the hole locations, take your Forstner Bit and Hammer and punch a centre hole. Do this in all 14 locations.
- Page 24 Wasteboard Creation and Installations Step 5: After counter boring your MDF the wasteboard strips should look like this. Step 6: Using a 1/16” Drill Bit, drill through holes in the centre of the counter bored holes. Note: Preforming this step helps to minimize chipping of the MDF. Step 7: Flip over the Wasteboard strip so the counter bore holes are facing down.
- Page 25 Wasteboard Creation and Installations Step 7: After counter boring and drilling the holes in all the wasteboard pieces, use an 1/8” Hex key and attach the wasteboard strips to your QCW Frame using the supplied bolts and washers. Congratulations! You have now completed installing your “Secure From Above” Wasteboard!
-
Page 26: Onefinity Warranty Policy
Onefinity Warranty Policy ONEFINITY 12-MONTH LIMITED WARRANTY PLEASE SEE REVERSE SIDE FOR DE- TAILS... - Page 27 If you no longer have the original mate- rials then you are solely responsible for the cost of shipping the machine to Onefinity. If you do not package the machine exactly as it was shipped to you using the original materials, then you will be solely responsible for any damage during shipping.
-
Page 28: Notes
General Disclaimer: While Onefinity has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, system/component/options availability are all subject to change without notice. Product design specifications and colours are subject to change without notice and may vary from those shown. Errors and omissions excepted. Images displayed... -
Page 29: Contact Us
General Disclaimer: While Onefinity has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, system/component/options availability are all subject to change without notice. Product design specifications and colours are subject to change without notice and may vary from those shown. Errors and omissions excepted. Images displayed...
Need help?
Do you have a question about the Quick Change Wasteboard Frame Foreman and is the answer not in the manual?
Questions and answers