Subscribe to Our Youtube Channel
Related Manuals for Cube UP 6000 Series
Summary of Contents for Cube UP 6000 Series
- Page 1 UP - Serie 6000 a product by Cube Design® Phone +45 86 98 74 11 Email cube@cube-design.dk Website www.cube-design.dk Assembly Manual This assembly manual is valid for tables in serie 6000. The columns are rectangular.
- Page 2 11 step assembly manual for the UP frame RESET THE DESK BEFORE USE PACKING LIST Press and hold the “down” button on the handset. Continue pressing Frame until the desk has reached the lowest position. Press the “down” button Column in 5 seconds until the desk enters the reset state, and the handset is Feet going down to complete the reset.
- Page 3 Step 5: Ad the feet on to the columns and fasten each with 2 M8x14 mm Step 6-7: Place the frame on the table top. Pull out the frame and make screws. Tighten the screws. sure that it is placed 60 mm from the edge, if you have a 1200-1800 mm table, and 100 mm form the edge if you have a 2000 mm table.
- Page 4 User manual Preface Repair Congratulations on your new Cube Design UP sit-stand desk. The desk is an Repair of the sit-stand desk must be made by authorized repairer / technician, electrically driven desk, intended for indoor use in office environments. The because the sit-stand desk does not contain serviceable parts which the user can repair.
Need help?
Do you have a question about the UP 6000 Series and is the answer not in the manual?
Questions and answers