Advertisement
5.
Slide Easel Side-Book (P-4) and Easel
Side-Markerboard (P-5) over the top of
Leg Assemblies (P-1). Join the 2 Easel
Sides together using 2 each Socket
screws(B), 4 Flat Washers (B), and 2 Lock
Nuts (C) as shown in illustration # 4.
[Hold Locknut (C) using Lock Nut
Wrench (J)while tightening
2 each Socket Screws(B)]
Illustration # 4
P-6
Do not use unless all screws are tight. At least every six months, check all screws
to be sure they are tight. If parts are missing, broken, damaged, or worn, stop use
of the product until repairs are made by your dealer using factory authorized parts.
A
Illustration # 3
B
C
B
A
P-5
P-1
A
P-6
6.
Slide 2 Easel Supports (P-6) over the Slide
Easel Side-Book (P-4) and Easel Side-
Markerboard (P-5) and secure to the 2
Leg Assemblies (P-1) using 4 each Socket
Screws(A) as shown in illustration # 4.
(Tighten all Screws at this time)
P-1
4
P-4
P-1
Advertisement
