Home Accents Holiday 691824 Manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
READ AND FOLLOW ALL
a)
SAFETY INSTRUCTIONS.
b) This product is for indoor use only. The electrical rating 0.5 A 120 V 60
Hz.
c) Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
d) This seasonal use product is not intended for permanent installation or
use.
e) Do not mount or place near gas or electric heaters, fireplace, candles or
other similar sources of heat.
f) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
g) Do not let lamps rest on the supply cord or on any wire.
h) Unplug the product when leaving the house, when retiring for the night,
or if left unattended.
i) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
j) Do not use this product for other than its intended use.
k) Do not hang ornaments or other objects from cord, wire, or light string.
l) Do not close doors or windows on the product or extension cords as this
may damage the wire insulation.
m) Do not cover the product with cloth, paper or any material not part of
the product when in use.
n) This product is equipped with push-in type lamps. Do not twist lamps.
o) Read and follow all instructions that are on the product or provided with
the product.
SAVE THESE INSTRUCTIONS.
p)
Pre-Assembly
Package Contents
Part Description
A Tree top
B Tree center
C Tree bottom
D Tree stand
E Foot pedal switch
F Adaptor
Quantity
1
1
1
1
1
1
7.5' Yukon Spruce Color Changing
Quick Set Tree
SKU# 691824
Assembly
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Open the stand to a 90 degree angle until the hole lines up with the
hole on the tube.
Step 3. Screw an eye bolt into the hole.
Assembling the tree
Please remove protective covers from the base of the pole for each tree
section before assembling.
Step 1. Insert tree bottom (C) into the tree stand (D) and tighten the screw.
(See Fig. 1)
Step 2. Insert tree center (B) into the tree bottom (C). (See Fig. 2)
Rotate tree center (B) slightly to ensure it matches the tree
bottom (C) and there is proper circuit connection if lights are not
functioning.
Step 3 Insert the tree top (A) into the tree center (B). (See Fig. 3)
Rotate the tree top (A) slightly to ensure it matches the upper
middle section (B) and there is proper circuit connection if lights
are not functioning.
Step 4. Insert the provided foot pedal switch and adaptor separately into
the tree bottom (C) according to the magnified drawing (See Fig.
4).
Step 5. Allow branches to fall into place or gently pull branches up and out.
When adjusting branches be sure that all wires are free of branch
hinges. (See Fig. 5)
Step 6. Shape the branches. Starting with tips closest to the pole, shape
one tip to the right, one to the left and one at the center of the
main stem. Repeat pattern for each branch. (See Fig. 6)
Step 7. This tree is color changing – just press the button on the foot
pedal switch for changing functions. The 8 lighting options
available are, Steady Warm White, Warm White rippling,
Steady Multi, Multi Rippling, Color Changing, Warm White
Cascade then Multi cascade, Color Changing Cascade and
Magician.