Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for DMD 8860
- Page 1 INSTALLATION AND PROGRAMMING GUIDE 8860 7-Inch Touchscreen Keypad...
-
Page 2: Table Of Contents
CONTENTS Get Started ......... 1 Program Keypad Options ....8 What’s Included .............1 Keypad Options Menu........8 What You’ll Need ..........1 Wi-Fi Settings ..........8 Procedure ..............1 Brightness & Volume ........8 Carousel Menu ..........8 Install the Keypad ......2 Installer Options .......... - Page 3 Reference ..........16 Keypad Bus Wiring Specifications ....16 Compatibility ............16 Ordering Information ........16 Keypads ............16 Specifications ........17 Certifications ........17 FCC Information ..........17...
-
Page 4: Get Started
8860 7-Inch Touchscreen Keypads offer an easy to use touchscreen interface with an on-board camera, optional panic keys, an internal speaker, a simple terminal connection to a 4-wire keypad bus, and other features. The 8860 has enhanced Wi-Fi communications to Dealer Admin™ for video system integration and image capture when arming and disarming at the keypad. -
Page 5: Install The Keypad
*Required connections Note: The keypad bus on a typical system can power up to four 8860 keypads on an XR panel and no more than one 8860 on an XT panel without the use of an external power supply. DMP recommends performing system power calculations before installing more than one device on the keypad bus. - Page 6 Keypad Back Black - Ground Green - Receive Data To Panel Yellow - Send Data Keypad Bus Red - Power Figure 2: Keypad Wiring 8860 Installation and Programming Guide | Digital Monitoring Products...
-
Page 7: Use The Keypad
Press 123 to enter numbers and to return to the number pad. ▶ Return to Select Areas Home Screen Number Pad Uppercase/ Lowercase Letters Special Characters Figure 4: Number Pad Figure 5: Standard Keyboard 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 8: Program The Panel
For use as a standard keypad, select KPD. TYPE: KEYPAD Communication Type DEVICE SETUP COMM TYPE: Ensure the COMM TYPE is set to KPD (Keypad Bus). Configure additional options as needed. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 9: Program The Keypad
The keypad has local and remote update capabilities. The keypad must be connected to Wi-Fi to perform a local and remote update. The remote update capabilities can be used for per device updates through Dealer Admin™. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 10: Program The Carousel Menu
Bypass. Default is no items selected. Select Edit Favorites to display the Edit Z-Wave icon on the Favorites screen. Select Edit Z-Wave to display the Edit Z-Wave icon for the Lights, Doors, Thermostats, and Appliances screens. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 11: Program Keypad Options
Ok to return to the previous menu. Set Arm/Disarm Snapshot Select this option to enable or disable Snapshot Verification Events at the keypad during an Arming or Disarming event. Default is On. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 12: Connect The Keypad To Wi-Fi
Connecting the keypad to Wi-Fi allows you to use video features with your keypad. DMP video features and events are available on the 8860 keypad and the Virtual Keypad mobile device app. Note: Videos are not stored locally on the keypad. -
Page 13: Recorded View
Areas. Tap Apply to activate the filter in the Events List. After a filter is activated in the Events List, a horizontally scrollable banner will display the applied filters. To remove an individual filter, press the X on each filter. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 14: Connect The Video Doorbell
Connect the Video Doorbell Note: The 8860 only supports one doorbell per system. Video doorbell capabilities are only available for the DMP Model V-4061DB Video Doorbell. In the Carousel menu, tap Video Doorbell. Press and hold the Talk button to talk through the keypad. Tap the Speaker button to mute and unmute the incoming audio. -
Page 15: Program Z-Wave Devices
Z-Wave favorites can be assigned at the keypad. Press Activate next to the name of the favorite that you want to activate. The name of the favorite will change to Activated after the process is complete. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 16: Train Your Customers
If arming, HOME AWAY displays. Select HOME to arm the perimeter or select AWAY to arm all areas. If a selection is not made, all areas will automatically arm AWAY. If ENTER CODE displays, enter a user code at the keypad. 8860 Installation and Programming Guide | Digital Monitoring Products... -
Page 17: Change System Wi-Fi Password
▶ Press 123 to enter numbers Tap CMD. Note: This notification refers to the panel Wi-Fi network only. The 8860 Wi-Fi settings can be found in Options. Clean the Keypad Failure to follow cleaning recommendations may result in equipment damage. -
Page 18: Icons
Z-Wave Thermostats Controls Video Decrease Increase Auto Heat Cool Room Temp Status Bar Header Home Sleep Away Perimeter All System System Ready Attention List Armed (Area) Chime Battery Trouble AC Trouble Wi-Fi 8860 Installation and Programming Guide | Digital Monitoring Products... - Page 19 ▶ When powering an 8860 from the keypad bus, to maintain auxiliary power integrity when using 22-gauge wire do not exceed 100 ft. When using 18-gauge wire do not exceed 500 ft. To increase the wire length or to add devices, install an additional power supply that is listed for Fire Protective Signaling, power limited, and regulated (12/24 VDC nominal) with battery backup.
- Page 20 SPECIFICATIONS Operating Voltage 12 VDC Current Draw 300 mA at 12 VDC Current Load in Alarm 350 mA at 12 VDC Dimensions 7.67” W x 6.96” H x 0.54” D Display Size 7” (1024 x 600) CERTIFICATIONS ▶ FCC Part 15 Registration ID: 2AUCA8860 ▶...
Need help?
Do you have a question about the 8860 and is the answer not in the manual?
Questions and answers