Receiver Connection - Nugens NW-200TR Quick Installation Manual

3. Connect the HDMI cable to the HDMI-in port of a computer or other player.
If the transmitter needs to be connected to another display, connect the HDMI
cable to the HDMI-Out port.

Receiver connection

For Steps 1 and 2 Antenna and power connection are the same as the
transmitter, please refer to the above transmitter connection steps.
3. Connect the HDMI cable to HDMI-Out of the TV, monitor and other display
to complete the connection.
Infrared booster transmitter/receiver connection
Connect the IR booster transmitter to the IR-Out port of the HDMI transmitter,
and the other end to the IR receiver of the player (please refer to the player's
user manual for the location of the IR receiver);
The infrared booster receiver is connected to the IR-In port of the HDMI
receiver, and the other end is fixed in a position where the IR controller is
visible.
HDMI transmitter and receiver pairing
1. Connect the transmitter and receiver to the power supply, connect the
HDMI input interface of the transmitter to the HDMI transmission line, and
connect the other end directly to the HDMI output interface of the receiver.
2. When the Sta working status indicator is on, press the Reset button on the
transmitter, then press the Reset button on the receiver.
3. If the Sta working status indicators of the transmitter TX and the receiver
RX flash at the same time, the pairing is completed.
6