Advertisement
Quick Links
Description
The Remote I/O module (TV115893) can be connected to the Remote I/O port
with three different cable lengths: TV5839 (1M cable), TV5840 (3M cable) and
TV5841 (5M cable).
I/O Function
Digital Inputs
Digital Outputs
Analog Outputs
Safety
WARNING:
•
Use the I/O Module only as specified in this manual.
SMT-07-1040 A1
TITAN VERSA REMOTE I/O MODULE
Total
Detail
8 Bi-directional
8
(PNP or NPN type)
6 Relay
8
2 PNP transistor
Voltage (0-10 VDC) or
2
Current (4-20 mA)
User Manual
Electrical Specifications
15-30 Vdc On Voltage,
Opto Isolation, 10 msec response
Relay: DC or AC Load
Transistor: 24 VDC, 250 mA max
12-bit A-D, 0.2% of full scale
Current - max load 500 Ohm
Voltage – max load 1000 Ohm
Advertisement
Summary of Contents for LACO Technologies TITAN VERSA
- Page 1 TITAN VERSA REMOTE I/O MODULE User Manual Description The Remote I/O module (TV115893) can be connected to the Remote I/O port with three different cable lengths: TV5839 (1M cable), TV5840 (3M cable) and TV5841 (5M cable). I/O Function Total Detail...
- Page 2 • Module can be mounted using two main methods Install provided DIN rail section to underside of TITAN Versa frame per picture below. Install module and add stop block on end Install in separate control panel or anywhere as needed Wiring Digital Inputs •...
- Page 3 Wiring Digital Outputs • Wire + 24 Vdc to 24V pin and 0 Vdc to 0V pin. These pins are above Y0 • Y0 and Y1 can be used as 24 Vdc PNP outputs. Ensure load is less than 0.25 amps •...
- Page 4 TITAN VERSA Operations Manual (SMT-07-1037) Maintenance and Accessories Description LMSA3850 Fuse, 5mm x 20mm, 2 AMP, slow blow, glass holder – (located inside TITAN VERSA in case – Fuse F2) 3085 West Directors Row, SLC Utah 84104 | 801-486-1004 | www.lacotech.com...