Garmin nuvi 30 Owner's Manual page 30

The device is connected
to the computer, but it will
not go into mass storage
mode.
I cannot see any new
removable drives in my list
of drives.
26
1
Disconnect the USB cable from your computer.
2
Turn off the device.
3
Plug the USB cable into a USB port on your computer and into your device.
The device automatically turns on and goes into USB mass storage mode.
4
Verify your device is connected to a USB port and not a USB hub.
If you have several network drives mapped on your computer, Windows can have trouble
assigning drive letters to your device drives. Refer to your operating system Help file to learn
how to map or assign drive letters.
nüvi 30/40/50 Owner's Manual