Custom Dynamics MPR-MICROAW-18ST Installation Instructions

Part Numbers:
MPR-MICROAW-18ST
Package Contents:
- Micro Turn Signal Adapter (2)
Fits: 2018-2022 Harley-Davidson® Softail® Models
ATTENTION
Please read all Information below before Installation
Warning: Disconnect negative battery cable from battery; refer to owner's
manual. Failure to do so may result in electrical shock, injury, or fire. Secure
negative battery cable away from positive side of battery and all other posi-
tive voltage sources on vehicle.
Safety First: Always wear appropriate safety gear including safety glasses
when performing any electrical work. It is highly recommended that safety
glasses be worn throughout this installation process. Be sure vehicle is on
level surface, secure and cool.
Important: This product is designed and intended for use as auxiliary light-
ing only. It is NOT intended to replace any original equipment lighting in-
stalled on the vehicle and should not be used for that purpose. This product
must be wired so that it does not interfere with any original equipment light-
ing.
Questions? Call us at: 1 (800) 382-1388
Custom Dynamics® Micro Turn Signal Adapter
Installation Instructions
We thank you for purchasing the Custom Dynamics® Micro Turn
Signal Adapter. Our products utilize the latest technology and
high quality components to ensure you the most reliable service.
We offer one of the best warranty programs in the industry and we
back our products with excellent customer support, if you have
questions before or during installation of this product please call
Custom Dynamics® at 1(800) 382-1388.
Installation:
1. Disconnect the negative battery cable from the bat-
tery.
2. Refer to the factory service manual and remove the
gas tank from the bike.
3. Locate and remove the terminal rubber boot cover
from the front left side of the frame exposing the termi-
nal block, refer to Photo 1.
1
M-TH 8:30AM-5:30PM / FR 9:30AM-5:30PM EST
02-2022