Dyer D+H RCT 003-11-U Instructions

RCT 003-11-U instructions
RCT 003-11-U LT

Intended use

- Radio control transmitter for controlling of
D+H radio drives and radio control receivers
- Installation behind a vent button in standard
wallbox
- Connection of two vent buttons possible
- Input 2 is in conjunction with the VENTIC
solar also suitable for connecting a room
temperature controller (RTR 231)
- Long battery life
- For VENTIC-Solar, GVL 8401-K-RC,
BDT 010-RC and RCM xxx-11-U
- Radio frequency 868 MHz – approved in the
entire EU
- 128 Bit AES coding
- High reliability against external operation –
32 Bit address codification and alternating
code with every keystroke (Code-Hopping)
- Multiple drives controllable with
one radio control transmitter

Connection

OPEN
www.dh-partner.com
RCT 003-11-U
30.212.00
T e m p : .
1x CR2450 ° 0
ANT
2 1
S1 2 1
9 8 7 6 5 4 3 2 1
OFF
ON
Antenna

Technical Data

Radio frequency
Encryption
Radio standard
Transm. power
Transm. range
Material
Dimensions
Battery type

Scope of supply

1x Radio control transmitter
1x Connection cable
O P
S T
P I 3 0
LT 84-U
C . . + . 5 ° 0 C
TEST
P
LT 84-U
< optional >
P
see DIP switch
S1-1 page 2
:868,3 MHz / FSK
:AES / 128 Bit
:ETSI EN 300220-1:2010
:ETSI EN 301489-1:2011
:ETSI EN 301489-3:2002
:app. 4 mW (e.r.p.)
:up to app. 100 m (free field)
:ABS, POM
:45 x 39 x 12 mm WxHxD
:1x lithium CR 2450
Insulate not used lines.
RTR 231
(only with
VENTIC-Solar)
5 3 1