TRIGEM CW3S20A Operation Manual page 48

EXTENDED PERIPHERAL SETUP
When you scroll down to this parameter, the following
message will be displayed on the right size of the Setup
message.
Peripheral Setup
IDE interface: Enabled
On-B/D FDC: Enabled
Mouse
Serial
Parallel
IDE interface
l
The system has on-board IDE that can be enabled by
SETUP. This IDE provides two hard disk chip selects. If
any HDC though bus exists, user must disable on-board
IDE.
On-B/D FDC
l
System has on-board FIX which is enabled/disabled
automatically depending on the existance of option
board FDC. The FDC has on-chip analog data selector
that operates up to lMB/s, and is implemented by all
DP8473 Floppy Disk controller functions.
Mouse
l
The system has on-board PS/2 compatible mouse port
which is able to enable/disable by setup.
Serial
l
The system provides on-board one serial ports (COMl
and COM2) that is selectable by SETUP. If enabled
serial port conflict with off-board serial port, on-board
serial port is disabled and display the message for
conflict.
The CMOS Setup Program
2-8
: Enabled
: COMl
: LPTl