Download Print this page

Sealey HVF14.V2 Instructions page 2

High velocity fan

Advertisement

2. SPECIFICATIONS
HVF14.V2
Fan Diameter . . . . . . . .14”
Power Supply . .230V 50Hz
Motor . . . . . . . . . . . . .70W
3. OPERATION
F

WARNING! Ensure that you read, understand and apply safety instructions in Section 1before using fan.
3.1.
Check that the speed control knob is set to “0” (off) and then plug into the mains power supply and switch the power on.
p
3.2.
The fan has three speeds in order to meet various air circulation requirements. Settings are “1” (Low), “2” (Medium) and, for maximum output, “3”.
3.3.
Adjust the direction of the air stream by moving the base from side to side and tilting the fan up or down.
3.4.
When you have finished using the fan ensure you turn the speed control switch to “0” (off) and disconnect the fan from the mains power.
4. CARE OF FAN
WARNING! Ensure that the fan is disconnected from the mains power supply before
F
attempting any of the following:
p
4.1.
Use a soft, damp cloth to clean the fan.
DO NOT immerse the fan in water and never allow water to drip onto the motor housing.
DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
4.2.
To clean the fan blade, undo the screw B and remove the ring A which holds
the front and rear grilles together. Remove the front grille and clean the blade and
inside the grilles.
Replace the front grille and refit the ring.
4.3.
Should the motor, speed control box or the power lead require service or maintenance
contact your local service agent.
4.4.
When not in use place the fan in its original box or otherwise cover to protect from
dust, and store in a safe, dry, childproof location.
5. DECLARATION OF CONFORMITY
Declaration of Conformity
HIGH VELOCITY FAN
Models HVF14.V2 & HVF18.V2
89/336/EEC EMC Directive
73/23/EEC Low Voltage Directive
93/68/EEC CE Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
HVF18.V2
Fan Diameter . . . . . . . .18”
Power Supply . .230V 50Hz
Motor . . . . . . . . . . . . .170W
We, the sole importer into the UK, declare that the products listed below are in conformity with the following standards and directives.
The construction files for these products are held by the Manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
Sole UK Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
sales@sealey.co.uk
e-mail
17th April 2003
www.sealey.co.uk
9A>
HVF14.V2 & HVF18.V2 - 2 - 170403

Advertisement

loading

This manual is also suitable for:

Hvf18.v2