Related Manuals for Ampcontrol OTS
Summary of Contents for Ampcontrol OTS
- Page 1 OUTLET TEST SYSTEM Dashboard User Manual Version: 4, October 2020 Designed and manufactured in Australia by Ampcontrol Pty Ltd...
- Page 2 The note symbol highlights key information. Please share these notes with other operators. ENVIRO The enviro (environmental) symbol highlights areas which may have an impact on the surrounding fauna and/or flora. Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 2 of 24...
- Page 3 MAG-204 Version 4 – OCT/2020 Copyright Notice The Ampcontrol Outlet Test System (OTS) described in this document is the property of AMPCONTROL PTY LTD. It is furnished under a license agreement and is to be used only in accordance with the terms of the agreement.
-
Page 4: Table Of Contents
6 Adding Users ....................16 6.1 Update User Permissions ................ 17 6.2 Removing a User ..................18 7 Rockstarter - NFC Tag Writing Guide .............. 18 Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 4 of 24... - Page 5 Figure 36: Write Card ..........................23 Figure 37: Write Successful ........................23 Figure 38: Write Failed ........................... 23 Figure 39: Read Tags ..........................24 Figure 40: Copy Tag Content ......................... 24 Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 5 of 24...
-
Page 6: Safety And Other Warnings
MAG-204 Version 4 – OCT/2020 1 SAFETY AND OTHER WARNINGS For safety reasons, the OTS and OTS-EL must be installed, operated and serviced only by competent personnel. Please read and understand this instruction manual completely before installing, operating or servicing this equipment. Failure to install or operate this instrument in accordance with the instructions contained in this manual may create hazardous operating conditions. -
Page 7: Accessing The Dashboard
OUTLET TEST SYSTEM DASHBOARD USER MANUAL MAG-204 Version 4 – OCT/2020 3 ACCESSING THE DASHBOARD The Dashboard can be accessed via the Ampcontrol AWARE URL: http://aware-iot.appspot.com/ Figure 3-1: Login Page To access the dashboard, the user will enter their email address and password. From here they will be directed to a private portal which displays site specific information. -
Page 8: Aware Webpage
Item 3: User Settings / Site selection This tab allows users to edit there profile settings including their OTS offline tablet Password. For users that have access across multiple sites, this tab will also the user to navigate between sites. -
Page 9: Switchgear Tab
Bottom Level (Device): This is a function of that outlet. This can be added to a Parent for some instances. The OTS aspect is considered a device (Ie Outlet 1 OTS) The dropdown arrow on the left of the desired asset row can be used to expand the current view or alternatively you can select that Parent to view its components. -
Page 10: Figure 4-4: Outlet Selected View
OTS Test Reports When a test report is has been uploaded to the AWARE cloud storage, it can be found under the OTS tile of that outlet, see Figure 4-4. To view a test report simply click on the desired test report. If the user requires a copy of the report it can be download as a PDF by selecting “Download PDF”. -
Page 11: Config Tab
All sites have users associated with them, these can be viewed under this tab, See Figure 4-6. A users roles and access to a site can ve viewed by selecting on that user, see Figure 4-7. Figure 4-6: Site Users Figure 4-7: User Permissions Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 11 of 24... -
Page 12: Figure 4-8: Asset Management View
All sites have assets associated with them, these can be viewed under this tab, See Figure 4-8. An Assets attributes can be viewed and edited here. Figure 4-8: Asset Management View Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 12 of 24... -
Page 13: Adding Assets
3. Find the newly created Asset and click the plus button. In this instance, we are creating an Outlet for a Rockstarter. Figure 5-3: Adding Outlet to Asset Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 13 of 24... -
Page 14: Figure 5-4: Adding Outlet Details
6. Enter the details for the device and click ‘ADD’. Figure 5-6: Adding Device Details 7. The asset and attached device(s) is now set up. Figure 5-7: Completed Asset Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 14 of 24... -
Page 15: Edit Or Delete An Asset/Device
Figure 5-8: Edit and Delete Details NOTE You cannot delete an asset that has assets or devices attached to it. You must delete the attached items first. Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 15 of 24... -
Page 16: Adding Users
Figure 6-2: Entering user email address 3. The user has now been added to the site. They will receive an email directing them to complete registration. Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 16 of 24... -
Page 17: Update User Permissions
User Management allows them to add, edit and remove users from the site. Asset Management allows them to add, edit and remove assets. Figure 6-5: Update User Permissions Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 17 of 24... -
Page 18: Removing A User
7 Rockstarter - NFC Tag Writing Guide This section is intended as a quick start guide for writing NFC cards for use on Ampcontrol’s Rockstarter. Should a card appear to be writing correctly but not have the desired result, check the Rockstarter logs that are accessible via the HMI. -
Page 19: Figure 26: Add New Nfc Card
8. Fill out the form selecting Organisation, site, card serial number and expiry date. Figure 10: NFC Form 9. Click the Generate button Figure 11: Generate Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 19 of 24... -
Page 20: Figure 29: Qr Code
Figure 12: QR Code 11. Take the Android device from step 1 and open the NXP writer app. 12. Select ‘Write Tags’. Figure 13: Write Tags Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 20 of 24... -
Page 21: Figure 31: Copy Qr Code
14. If asked, allow the App to access the device camera. Figure 15: Allow Camera 15. Point the device camera at the QR code on the website screen. Figure 16: Scan QR Code Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 21 of 24... -
Page 22: Figure 34: Save & Write
16. A screen showing the tag message will be shown. Select the ‘Save & Write’ button. Figure 17: Save & Write 17. A screen showing options will be shown, keep default options and select ‘Write’. Figure 18: Write Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 22 of 24... -
Page 23: Figure 36: Write Card
The app will attempt to write the card. A success message should appear. Figure 20: Write Successful b. If a fail message is displayed, attempt to write again by tapping the ‘Retry’ button. Figure 21: Write Failed Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 23 of 24... -
Page 24: Figure 39: Read Tags
NFC on the back of the device. Figure 22: Read Tags a. If requested to send the card information to Ampcontrol Tech Support you can copy the card content by: i. Holding your finger on the ‘Content’ field THEN ii.
Need help?
Do you have a question about the OTS and is the answer not in the manual?
Questions and answers