PRODUCT FUNCTIONS
Display of perpetual calendar (2000-2099), time, date and week; switching between 12 / 24-hour display
Temperature: switching between Celsius / Fahrenheit scale (0°C~50°C, 32°F~122°F)
6 natural sounds music ringer
6 light colors
Snooze function
Countdown hours(23 : 59 : 59-00 : 00 : 00)
Color backlight
NORMAL TIME MODE
Upon start, the normal time is AM 12:00 under 12-hour system. The initial date is January 1, 2007.
TIME SETTING
Under normal time, you may press SET key to enter Time and Date setting, respectively setting the Hour,
Minute, Year, Month and Date to normal time.
Press SET key. The Hour will begin to blink. In this case, press UP or DOWN key to adjust the time up or
down. Then, keep pressing SET key and use UP or DOWN key to adjust the minute, year, month and date
to normal time display (The week will automatically change with the date setting).
Under setting state, you may also press MODE key twice to exit the setting. You will also exit the setting if
not pressing any key within 1 minute.
12/24 MODE SWITCH
Under normal time, you may press UP key to perform 12 / 24-hours switch.
ALARM AND SNOOZE
Under normal time, press MODE key to enter Alarm and Snooze (Mark: ALARM).
Press SET key again. The Hour will begin to blink. In this case, press UP or DOWN key to adjust the time
up or down. Then, keep pressing SET key and use UP or DOWN key to adjust the minute, Sleep Late
interval time (1- 60 minutes), and then press SOUND key to select from 6 pieces of alarm music and
return to alarm time.
Under setting state, you may return to normal time display by pressing MODE key once or pressing no key
for 1 minute.
Under alarm time, you may use UP or DOWN key to activate the alarm (Mark: "(((
"Zz".
When the alarm clock reaches the preset time, it will ring for 2 minutes. When reaching the Sleep Late
interval time, the alarm clock will ring twice and last 2 minutes for each ring. Press SET key to cancel the
ring or press any key to pause.
When the mark of alarm and sleep late is not activated, i.e. the alarm and sleep late function is
deactivated, the alarm clock will not ring even reaching the preset time. Likewise, the snooze is disabled if
only alarm mark is activated. To enable the snooze, the alarm and the snooze mark must be activated
simultaneously.
TIMER MODE
Under any of the state, press TIMER to enter countdown timer mode. The default time on display is
23 : 59 : 59.
Press SET key to enter setting, in which case the Hour begins to blink. You may press UP and DOWN to
LUMINOUS DIGITAL
ALARM CLOCK
Ref. : RL10
- User Instructions-
English
·
)))") and Snooze mark
Need help?
Do you have a question about the RL10 and is the answer not in the manual?
Questions and answers