Powerwerx PWRbox2 User Manual

714-674-0073 ▪ help@powerwerx.com ▪ www.powerwerx.com ▪ 23695 Via Del Rio, Yorba Linda, CA 92887
Portable Power Boxes for Bioenno Power LiFePO4 Batteries
Congratulations on purchasing a portable power box, ideal
for charging phones, tablets, and DC powered devices such
as 12V air mattress compressors and two-way radios. If the
power goes out or you are camping in a remote location,
these power boxes are a perfect way to keep your favorite
toys powered up. While these boxes are designed for
customers using the Bioenno (LiFePO4) batteries, other 12V
batteries may be used. However, the customer is responsible
for ensuring their battery fits in the box and obtaining the
proper connection cable from the battery to the box.
Battery Installation
1 . Determine the optimal mounting position for your
battery. For larger sized batteries, you may have to shift
the battery to one side for the battery box lid to close
properly. Position the batteries cables as close to the
PWRbox lid hinge as possible or consider mounting the
battery in the middle for even weight distribution.
2. Only after testing where to place your battery, use the
supplied double-sided Velcro for battery mounting.
Remove only one side of the adhesive protective cover
and apply to the bottom of the battery.
3. Next, remove the adhesive protective cover on the other
side of the Velcro strip and firmly press the bottom of
the battery to the bottom of the PWRbox, applying firm
pressure for 30 seconds.
PWRbox2 & MEGAbox2 User Manual
Battery Connection
• PWRbox2 - Bioenno Power LiFePO4 Battery with 30A
Powerpole connector for the (12A, 15A, 20A batteries).
Connect the PWRbox fused red/black Powerpole
connector to the Bioenno battery's matching red/black
Powerpole connector.
• PWRbox2 - Bioenno Power LiFePO4 Battery with gray
SB50 Powerpole connector (30A, 40A batteries)
Connect the PWRbox fused gray SB50 connector to the
Bioenno battery's matching gray SB50 connector.
• MEGAbox2 - Bioenno Power LiFePO4 Battery with gray
SB50 Powerpole connector (30A, 40A, 50A, 60A, 70A
batteries)
Connect the MEGAbox fused gray SB50 connector to the
Bioenno battery's matching gray SB50 connector.
• Customer Supplied Battery
When connecting a battery other than Bioenno, the
customer will have to make their own connection cable
from the box to the battery.
PWRbox2 & MEGAbox2 ▪ Rev 12/2022