Download Print this page

Advertisement

Quick Links

Disclaimer of FJD PONY 500
Safety Instructions
Read the following instructions before use to ensure your safety. Improper use may
cause fire, property damage, or personal injuries.
Instructions for use:
1) FJ Dynamics is not liable for any consequences caused by failure to follow the
instructions, including but not limited to charging with other bib-FJD charging cables.
2) Do not place the product near a fire source. Avoid the product from direct sunlight.
3) Do not charge, use, or store the product in a bathroom or in the rain or wet areas.
4) Do not put the product in water. Water intrusion into the product may cause
chemical reactions to the battery, resulting in fire or explosion. Do not use swollen,
leaking, or damaged batteries. If your battery is abnormal, contact our technical
support staff.
5) Do not use the battery around strong electrostatic or electromagnetic fields.
Otherwise, the battery control board may malfunction during use, causing serious
accidents.
6) Do not disassemble or puncture the product in any way, as it may cause leakage,
fire, or explosion.
7) Avoid collision. Do not use the product if a serious collision occurs with it.
8) If the product falls into water during use, take it out immediately, put it in a safe
area, and keep it in a safe and closed space until it dries out completely. Do not use
it again, and dispose of it properly according to the "Disposal and recycling" section
below.
9) If the product catches fire, it is recommended to use the fire extinguishers in the
following order: water or water mist, sand, fire blanket, dry powder, and carbon
dioxide fire extinguisher.
10) Do not insert pins, wires, or other metal objects into the housing, sockets, or
control board of the product, as they may cause a short circuit.
11) Do not place heavy objects on the product.
12) Use and store the product in a clean and dry environment. If the surface of the
plug or outlet is dirty, clean it with dry cloth. Otherwise, it may cause poor contact,
energy loss, or charging failure.
13) Do not put the product in a microwave oven or pressurized container.

Advertisement

loading

Summary of Contents for FJDynamics PONY 500

  • Page 1 Disclaimer of FJD PONY 500 Safety Instructions Read the following instructions before use to ensure your safety. Improper use may cause fire, property damage, or personal injuries. Instructions for use: 1) FJ Dynamics is not liable for any consequences caused by failure to follow the instructions, including but not limited to charging with other bib-FJD charging cables.
  • Page 2 14)Do not insert your fingers into the xt60 interface, and do not touch the interface with wet fingers. Precautions for Charging 1) Charge the product with a FJD certificated power supply. 2) When using solar panels for charging, the open circuit voltage should not exceed 55 V.