Product Installation - Chacon 34151 User Manual

1.1. Product Installation

This detector is suitable for indoor use only. This device is recommended near your cooker,
water heater, and near any gas-fired source. It should be installed 1m~4m from the gas
appliance and maximum 30 centimetres from the ceiling.
Tip: It is advisable to check that the device is working properly before installing the detector
on its mounting plate. Make sure that the location is close to a power source (socket).
8
9
6
7
4
2. Indication of product operation
2.1. Connecting the device to the power source
When you plug in the detector, the status indicator LED flashes green. Then it automatically
goes into warm-up mode for 3 minutes. During this time, the unit cannot detect gas leaks.
After 3 minutes, the green LED will light up to let you know that it is operational and ready
for use.
1
≤30cm
2
1~2m
3
5
1 Ceiling
2 Methane Gas Detector
3 Kitchen ventilator
4 Gas stove
5 Ground
6 Ball valve
7 Gas meter
8 Inlet ball valve
9 Gas