Parameters And Measure Value; Operating Using The Control Panel - Black & Decker BDXBT53 Instruction Manual

Installation & Operation Manual

4.2 Parameters and Measure Value

Long press the button for 10 seconds to examine the running parameters, change the item with the ^ and v buttons to check
the measure value.

4.3 Operating Using the Control Panel

To Increase the Temperature:
Proceed as explained above using the up arrow (^) to increase the temperature setting 0.5 degree at a time.
To Lower the Temperature:
Proceed as explained above, using the down arrow (v) instead.
To Display the Temperature in °F or in °C:
Long press the key for 10 seconds to switch.
To Set Running Time:
Press the key to enter setting mode, adjusting the value with the up arrow key (^) and the down arrow key (v).
To Set Shutdown Time:
Press the key to enter setting mode, adjusting the value with the up arrow key (^) and the down arrow key (v).
To Set the Clock:
Press the key to enter setting mode, adjusting the value with the up arrow key (^) and the down arrow key (v).
DISPLAY
ITEM
0 ***
0
1 ***
1
2 ***
2
3 ***
3
4 ***
4
5***
5
*** Displays the measure value
MEANING
Inlet Water Temperature
Discharge Temperature
Coil Temperature
Suction Temperature
Air Temperature
Valve Opening Degree
ENGLISH
Ambient
Page 13