SOtM sPQ-100PS Operating Instructions

sPQ-100PS
Precaution
Please read these instructions carefully before use.
Do not attempt to disassemble or modify the product.
n
Keep the product away from external shocks or vibrations.
n
Do not use damaged or peeled cables.
n
Do not use the product outdoors.
n
Product specifications and features are subject to change without notice.
n
Warranty Information
Free warranty service
n
In the case that a defect is found which is caused by a design or the production flaw while using the device properly, the manufacturer is
l
responsible for the faulty product and there is free warranty service for 1 year from the date of purchasing.
Even during the warranty service period, malfunction or damage of products caused by inevitable incidents such as a natural disaster is not subject
l
to the free warranty service.
Warranty service at a cost
n
The free warranty service period is expired.
l
Malfunction of the product caused by a user's fault.
l
Malfunction of the product caused by incidents.
l
Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc.
l
In case of the warranty service at a cost, the customer should cover the shipping costs.
l
Examples of a user's fault
n
In case of attempts to disassemble or modify the device.
l
In case of not following the instructions in this manual.
l
Please read these operating instructions and Q&A board on our website carefully before asking for the warranty service.
n
Supplied Components
A sPQ-100 Unit
n
A power supply unit
n
A DC cable
n
sPQ-100PS Operating instructions
n
Specification
User interface
n
- Power on/off switch on sPQ-100, the power supply unit
- AC input on/off switch on rear panel of the power supply unit
- Operating indicator LED x1 on sPQ-100, the power supply unit
- MM/MC selection switch
- Input impedance/capacitance selection switch
MM : 47KΩ, 100pF, 150pF, 220pF, 330pF
MC : 15Ω, 20Ω, 100Ω, 500Ω, 10pF
Bass boost level selection switch
-
14.5dB, 16dB, 20dB @ 20Hz, 33dB @ 7Hz(no bass shelf)
Bass turnover frequency selection switch
-
250Hz, 354Hz, 500Hz, 800Hz
High frequency roll off frequency selection switch
-
1592Hz, 2122Hz, 2500Hz, 3183Hz
Total gain selection switch
-
50dB, 60dB, 70dB, 80dB @ 1KHz
Tolerance : ±10%(all switch location)
-
Input/Output signal
n
Input signal
-
Stereo RCA jack with earth terminal x 1
MM input
Signal level : 3mVac ~ 10mVac @ 1KHz
Recommended impedance : 47KΩ
Recommended capacitance : 100pF ~ 330pF
Frequency response : 20Hz ~ 20KHz
Operating instructions
Rev1.0e
MC input
Signal level : 0.1mVac ~ 1mVac @ 1KHz
Recommended impedance : 15Ω ~ 500Ω
Frequency response : 20Hz ~ 20KHz
Output signal
-
Stereo RCA jack
Output signal level : 9.5Vac Max
Output impedance : 20Ω typical
Frequency response : 20Hz ~ 20KHz
SNR : 100dB typical @ 1KHz max output level
(MC, RIAA, 50dB Gain setting)
Tolerance : ±10%(all signal level, gain and frequency)
-
AC power input for the power supply unit
n
Input voltage : 100Vac ~ 240Vac
-
Frequency : 50Hz/60Hz
-
Current : 2.5A>
-
Operating environment
n
Operating temperature : 0 ~ +40℃
-
Storage temperature : 0 ~ +40℃
-
Operating & storage humidity : 10% ~ 90%
-
Dimension
n
Each unit size : 106 x 48 x 245(mm)
-
Weight
n
Total 3kg >
-
www.sotm-audio.com