Page 1
Area/Line Coupler Area/Line Coupler Art. No. : 2142REG-01 Operating instructions 1 Safety instructions 2 Device components Figure 1 (1) Operation LED, green (2) LED yellow, data reception on higher-order line (HL) (3) LED yellow, data reception on subordinate line (UL) (4) Diagnostic LED, red (5) Programming LED, red (6) Programming button...
Page 2
3 Function System information This device is a product of the KNX system and complies with the KNX directives. Detailed technical knowledge obtained in KNX training courses is a prerequisite to proper understanding. The function of this device depends upon the software. Detailed information on loadable soft- ware and attainable functionality as well as the software itself can be obtained from the manufacturer´s product database.
Page 3
Figure 2: Use as a backbone and line coupler (BK and LK) Figure 3: Use as a line coupler (LK) and amplifier (V) TLN = Bus device DR = Choke SV = KNX power supply Each line requires a separate power supply. 82556515 28.06.2017...
Mounting and connecting the device Mount the device on a DIN rail with the device connection terminals facing downwards. i Use only cables which are approved for KNX. Connect the higher-order line to the left device connection terminal (8). Power is supplied to the device via this terminal.
Area/Line Coupler 5.1 Technical data Rated voltage KNX DC 21 ... 30 V SELV Current consumption Higher-order line Approx. 6 mA Subordinate line Approx. 8 mA Protection class Connection mode KNX Standard device connection terminal Ambient conditions Ambient temperature 23 ... 113 °F (-5 ...