Page 1
Klutch 100ft. 1/2in. O.D. Nylon Tubing Master Kit with 3/8in. I.D. Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Page 2
Thank you very much for choosing a Klutch product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code (if applicable): _____________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Packaging Contents ..........................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Operating Instructions .......................... 6 Maintenance ............................8 Parts Diagram ............................9 Parts List ..............................9 Replacement Parts ..........................9 Limited Warranty ..........................10 Page 3 of 11...
Intended Use The air piping system allows you to design and install your own personalized air system any way you want. The hose fits easily into the included connectors. No special skills or equipment are needed. Just push the tubing into the fitting until fully seated. The nylon hose is flexible enough to get around large radius corners without special fittings.
Page 5
was designed. • Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger industrial equipment. There are certain applications for which this equipment was designed. It will be a safer experience and do the job better at the capacity for which it was intended. DO NOT use this equipment for a purpose for which it was not intended.
• Do not overreach. Keep proper footing and balance at all times. ⚠CAUTION PRODUCT USE AND CARE • Do not force the product. Products are safer and do a better job when used in the manner for which they are designed. Plan your work and use the correct product for the job. •...
Page 7
this tool or use it for an unintended purpose. Do not use the tool if any parts are damage broken or misplaced. Repair or replace the parts. Check the air pressure at the terminal point for each tool, to make sure the pressure does not exceed the tool’s maximum PSI.
3.Pull on tubing to verify it is properly seated in fitting. 4.To disassemble, simply push the release button against the body and remove tubing. 5.For re-insertion, cut off marred end of tubing and repeat process. 6.Tubing must be inserted 3⁄4” into fitting to seal properly Maintenance Maintain the product by adopting a program of conscientious repair and maintenance in accordance with the following recommended procedures.
Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 11
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in Vietnam Page 11 of 11...