Summary of Contents for LUMIEN TR-250
- Page 1 TRANSFORMER INSTALLATION GUIDE Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
-
Page 2: Package Contents
B4 Wall Anchor 5*25 (QTY2) C1 ST4.2*30 (QTY2) C2 Wall Anchor 8*40 (QTY2) Drilling Location Map *Tools required for assembly (not included): Power Drill, Level, Safety Goggles, Phillips Screwdriver, Pencil and Ladder.* Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com... - Page 3 Photocell will not operate plastic film covering (30cm to 120cm) of the ground. It will affect photocell for Auto properly if installed too close to the LCD display panel. dusk-to-dawn mode. nighttime light source. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
- Page 4 Tightening torque of 10.6 1b-in. Mount the Transformer Option #1 3.1 Option 1:Standard Wall Mounting Insert the two included support screws 4-9/16”(11.6cm) apart in a wall near an electrical outlet and mount the transformers. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
-
Page 5: Year Warranty
The replacement part is inserted into the socket and the cap is screwed back onto the socket to provide a water tight connection. Note that the bi-pin connector is polarized Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com and can be inserted into the socket only one way. - Page 6 The landscape wire should run from the transformer to each light without being cut. Do not run the landscape wire within 10 feet(3M) of a pool, spa or fountain. If the landscape wire is too long, cut it with a cable cutter. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
-
Page 7: Setting The Clock
Press MENU until CLOCK LED indicator is lit and the digit indicator is flashing. Then press OK. b. When AM and PM begins to flash, press the UP or DOWN arrow button to Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com... -
Page 8: Operating In Manual Mode
Press MENU until MANUAL ON/OFF indicator is lit and then press OK. b. The MANUAL ON/OFF mode is now set to ON. Press the UP arrow button to turn on the lights. Press the DOWN arrow button to turn off the lights. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com... - Page 9 The setting is now complete. The PHOTOCELL ON/ TIMER OFF LED indicator stays lit and display shows the current time. The lights will automatically turn on at night and will turn off after a set time interval. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
- Page 10 Press MENU until the TEST LED indicator is lit and press OK. The time of photocell feeling the external light signal: the lights will turn on at dusk and off at dawn within 0.5 seconds. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
- Page 11 The display might show “ERR” under the above circumstances. Please unplug the power cord first. After resolving the issue with power, press RESET button. Then plug the power cord back. the transformer functions may need to be reset. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
-
Page 12: Troubleshooting
⚫ The photocell is mounted in an area that has too The lights do not switch on at dusk much constant light at night, preventing the system from turning on. Lumien Lighting | Website: www.lumienlighting.com | E-mail: orders@lumienlighting.com...
Need help?
Do you have a question about the TR-250 and is the answer not in the manual?
Questions and answers