Biostar INTEL B760 STANDARD Series User Manual page 12

CNVi Mode
This option configures Connectivity. [Auto Detection] means that if Discrete solution is discovered
it will be enabled by default. Otherwise Inegrated solution (CNVi) will be enabled; [Disable
Integrated] disables Integrated Solution.
» » Note: When CNVi is present, the GPIO pins that are used for ratio.
Wi-Fi Core
This is an option intended to Enable/Disable Wi-Fi Core in CNVi.
BT Core
This is an option intended to Enable/Disable BT Core in CNVi.
BT Audio Offload
This is an option to Enable/Disable BT Audio Offload which enables audio input from BT device
in HFP format to the audio DSP and enables power efficient audio output to BT device via A2DP
format. This feature only support with Intel(R) Wireless-AX 22560.
WWAN Configuration
Configure WWAN related options.
WWAN Device
Select the M.2 WWAN Device options to enable 4G - 7360/7560 (Intel), 5G - M80 (Media Tek)
Modems.
Firmware Flash Device
Enable or Disable WWAN Fireware Flash Device.
Wireless CNV Config Device
Enable or Disable WCCD ACPI device node.
WWAN Reset Workaround
Enabling this workardound will result in BIOS asserting FULL_CARD_POWER_OFF#, PERST# and
RESET#WWAN signals before the WWAN device Power-On Sequence is ececuted. Disabling it
has no impact.
WA - WWAN OEM SVID
WWAN OEM Sub-Vendor ID
WA - WWAN SVID Detect Timeout
The timeout value (ms) for detecting WWAN OEM SVID. Please notice it's workaround for OEM
only.
12 | 2. Advanced Menu