Eluktronics LPP G1 User Manual

Liquid Propulsion Package User Guide
Please read all instructions before using this product. Keep this manual at hand until
you feel comfortable. This is a new and exciting product that can come with risk of
damage if not properly used. Liquid damage is not protected under warranty, so please
be certain to review this manual or visit Eluktronics.com/How-To-LPP for video
tutorials and step-by-step guides.
Note: The audibility during injection mode and the initial period of use will be louder than
the normal operation. Give it time to settle and work out any potentially accumulated air
bubbles.
Package Contents
1. Liquid Propulsion Package x 1 (with rubber lid)
2. Black Dual Head Drain Plug x 1
3. Water Tube x 2
(with black and silver connectors attached to each end)
4. Liquid Injection Funnel x 1
5. Hexagon Water Stopper Cap x 2
(already connected to the Liquid Propulsion Package)
6. User Manual x 1
Note: An outgoing quality control (oqc) testing process with distilled water has been performed
for each Liquid Propulsion Package. This ensures a closed loop circuit with no leakage occurs
with proper installation and adherence to the instructions.
CAUTION: Using unauthorized extension cables, tubes or modifying/tampering with the
Liquid Propulsion Package will invalidate your warranty.
Power Adapter: Output rated 19.5Vdc, 11.8A or 19.5Vdc, 16.9A or 20Vdc, 14A. Power will vary
based on the hardware purchased and included with your system.
The unit can be operated at an ambient temperature of max.
35°C (95°F). Do not subject it to temperatures below 5°C
(41°F) or above 35°C (95°F). Freezing can occur with result
of potential damage.
SCAN FOR INSTRUCTIONS
AND VIDEOS ONLINE
MANRLCT011-P111