Table of Contents
Advertisement
Quick Links
Living Flame Gas Patio Heater in S
USER'S MANUAL
Pyramid Outdoor Patio Heater
Model: MX286961AAA
Assemble Instruction
Model Number: PH08-A
Read this instruction be
appliance must be inst
instructions and local
appliance in enclosed a
PROHIBITED.
• Do the leak test after e
• Never check for leaks
• Do not store or use
vapors and liquids in t
• Close the valve of the
• Extinguish all naked
electrical appliances
• Check for leaks as det
• If odor persists, conta
immediately
WAR
IF YO
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for COMHARBOR MX286961AAA
- Page 1 Living Flame Gas Patio Heater in S USER’S MANUAL Pyramid Outdoor Patio Heater Assemble Instruction Model Number: PH08-A Model: MX286961AAA Read this instruction be appliance must be inst instructions and local appliance in enclosed a PROHIBITED. • Do the leak test after e •...
- Page 2 ainless Steel PLEASE KEEP THIS INSTRUCTION FOR FUTURE REFERENCE. WARNlNG SAFETY RULES PLEASE READ THE FOLLOWING SAFETY RULES PRlOR TO OPERATION OF THE HEATER WARNING • Do not leave a heating appliance unattended, especially if children or pets are also present. •...
- Page 3 PRECAUTIONS • • Do not use the heater in an explosive atmosphere. • Before use, check the hose. • Do not attempt to alter any parts of the heater. Example: • Never replace or substitute the regulator, use only supplied regulator which is suitable both appliance category and normal pressure of gas.
-
Page 4: Installation
LEAKAGE TEST A gas leakage test must be performed again at the installation site. Please follow the procedure below for leakage test. • Make a soap solution of one part liquid detergent and one part water. The soap solution can be applied with spray bottle, brush or rag. - Page 5 PARTS LIST 1 Part NO. PART NAME PICTURE REMARKS Middle plate Control box Bottom plate Lower support Upper support Upper plate Plate cover Pre-assembled in the middle plate Glass tube Damper Pre-assembled in the upper plate...
- Page 6 PARTS LIST 2 Part NO. PART NAME PICTURE REMARKS Lower protection guard Handle Connecting tube Fixing bracket Side panel Front panel Screw M3/16’’ All preassembled in relative parts Handle Pre-assembled Chain with Handle connecting tube AA battery Optional part Wheels INJECTOR...
-
Page 7: Heater Assembly
HEATER ASSEMBLY Tools Required: 1 Screwdriver, 1 adjustable spanner 1. Unscrew the pre-assembled screws supports(4) to bottom plate (3) and middle plate (1) using the unscrew screws (17). 2. Unscrew the pre-assembled screws (M3/16 ). Connect 4 upper supports (5) to the lower supports (4) and secure using screws (17). - Page 8 6. Attach the protection guards (11) onto using screws (17). the frame by putting the hooks into the holes of the frame. Fix the guards by 7. Assemble the wheels on the base with M6X12 screws x 4pcs and M6 nuts x 4pcs (pre-assembled on the wheels).
-
Page 9: Operation
COMPLETED 9. Screw the handle(18) onto the front panel (16), attached the handle connector tube (12) back the front panel, screw them with 2pcs M4X8 bolts, hook the chain (19) to the hole in control box, then Close panel to the middle plate, the panel is attracted by the magnets. Tips: the chain can hold the panel while operating the control OPERATION Preparation:... -
Page 10: Lighting Instructions
Never splash any liquid to the glass tube when the heater is in operation Never use the heater if the glass tube is damaged The glass tube will be extremely hot when it is working, do not try to touch it ... -
Page 11: Technical Specifications
TR, BG, IS, LU, MT, MK, AL. I3B/P for 37mbar 50mbar I3B/P for AT, DE, CH, SK Applicant : COMHARBOR LIMITED Address : SWIFT 41 (UNIT D) SWIFT PARK, RUGBY, CV21 1DZ PROBLEM PROBABLE CAUSE SOLUTION Pilot will not light...
Need help?
Do you have a question about the MX286961AAA and is the answer not in the manual?
Questions and answers
I **** looking for a replacement glass tube thanks