Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Packedge RK-1
- Page 1 RK-1 7-Port Gigabit Router with OvrC OvrC Enabled QUICK START GUIDE...
- Page 2 Introduction The Pakedge RK-1 7-Port Gigabit Router with OvrC gives you incredibly fast speeds and unmatched ease of use. The router has advanced features like port forwarding, 1:1 NAT, and static routes, while also supporting UPnP for simple compatibility with common consumer devices.
- Page 3 • Ethernet cable Installation 1 Open the box and remove the RK-1. 2 If mounting the RK-1 in a standard 19” AV rack, attach the included rack-mount brackets to the sides of the RK-1. If not mounting to a rack, ensure that the RK-1 is physically mounted near power and the ISP modem.
- Page 4 Logging in 1 Connect the router to power and toggle the power switch on the rear panel to the On position. The power LED will light up. 2 Connect a computer to the router’s LAN port using an Ethernet cable. Enter 192.168.1.99 into the address bar of your web browser.
- Page 5 The first-time configuration screen opens, which enables you to configure all basic router settings to get up and running quickly. 4 Change the settings, including the login credentials, then click Apply. 5 To see an overview of your router status, click the Overview tab.
- Page 6 Registering your device with OvrC OvrC gives you remote device management, real-time notifications, and intuitive customer management, right from your computer or mobile device. Setup is plug-and- play, with no port forwarding or DDNS address required. To add this device to your OvrC account: Mobile Access Point Apps...
- Page 7 Resetting the Router POWER INPUT: 100-240VAC FREQ: 50-60Hz RESET Button A Simple Reboot: Press and release the RESET button to restart the router. With the router powered on, press and hold the RESET button B Factory Default: for at least ten seconds, until the power LED starts blinking, then release it.
- Page 8 Technical Support For technical help: www.pakedge.com/portal support@pakedge.com (650) 385-8703 For non-technical inquires: customerservice@pakedge.com (888) 400-4072 (opt 3) snapav.com/warranty Find details of this product’s 3-Year Limited Warranty at or request a paper copy from Customer Service at (866) 424-4489. Find other legal resources, such as regulatory notices and patent information, at snapav.com/legal 11734 Election Road, Draper, UT 84020 (888) 400-4072...
Need help?
Do you have a question about the RK-1 and is the answer not in the manual?
Questions and answers