Loft Cat Condo Assembly

LOFT Cat Condo
read first
ASSEMBLY
• Designed for hand assembly.
No tools required.
• Check regularly to ensure all
components are connected.
• Place finished unit in an area
with room for cats to play and
interact with all features.
very helpful tips
• Loosely lay out all parts for each step.
• Slide tubes into fabric sleeves first—then add connectors.
• Use appropriate force when assembling connectors and tubes
to avoid unnecessary damage.
1
To form the BASE, you will
need these pieces:
PARTS NAME QTY
3 S
3-Way Straight ( 4 )
3 C
3-Way Corner ( 4 )
A35
Long Tube ( 5 )
A16
Short Tube ( 4 )
Foam Pads ( 8 )
To finish the base, you will
need these pieces:
PARTS NAME QTY
A35
Long Tube ( 1 )
A16
Short Tube ( 2 )
A1
Sisal Post ( 1 )
REVIEW BEFORE
Self-adhesive foam pads
(if used) should be placed
on the underside of all
eight connectors.
connectors & parts
3S 3C
(6 pcs) ( 4 pcs)
A35 B40
Long Tube Long Curved Tube
(12pcs) (2pcs)
A16 B31
Short Tube Curved Tube
(6 pcs) (6pcs)
4C
Foam footer pads
(8pcs )
(6 pcs)
A1
Sisal Post
(1pcs)
M1
Plush Mat
(1pcs)
Lay out the components out on
the floor, then insert tubes into
connectors to assemble the base.
After the base has been
assembled and firmly
tightened, add the vertical
tubes and Sisal post.
R2
Hideaway
Arch
(1pcs)
L2
Hideaway
with Ramp
(1pcs)