Download Print this page

Playlearn Sensory Therapy Swing Instructions

Sensory Therapy Swing Instructions

SAFETY FIRST NOTICE - IMPORTANT POINTS

• 85Kg weight limit

• Active eyes on supervision at all times

• Fall and strangulation hazards if product not used correctly

• Only use correct hardware that comes with the swing

• Read the installation instructions carefully and follow each step. A professional should install.

• Contact Play'n'Learn at

• Swing fabric is designed for indoor use. It can go outside but must store inside at night.

• Routinely check all aspects of product for wear and damage, discontinue use it damage found.

• Move fabric around periodically to prevent wear in one spot

In order to install the mounting strap, find the seam on the swing, then put it under the fabric

and make a neat loop. Under the child's weight the loop will tighten in a way that prevents

the material from moving around.

Our mounting kit was designed for ceilings with wooden studs. The ceiling hook is easy

to install and shouldn't cause any problems, however, we always recommend asking a

professional for help. Please remember -

kiaora@playnlearn.co.nz

safety

if you would like a handyman to install for you.

first.

Table of Contents

Do you have a question about the Sensory Therapy Swing and is the answer not in the manual?

Page 1 Sensory Therapy Swing Instructions SAFETY FIRST NOTICE - IMPORTANT POINTS • 85Kg weight limit • Active eyes on supervision at all times • Fall and strangulation hazards if product not used correctly • Only use correct hardware that comes with the swing •...
Page 2 INSTALLATION INSTRUCTIONS CONTINUED Locate a beam minimum 4cm wide, and a site with 1 metre radius from any objects. The tools you need: Use base plate to mark holes in beam. Use 12mm bit to drill to • Step ladder 5cm depth into beam.