Advertisement
Table of Contents
6dBi and 7dBi Antenna Deployment
Introduction
This is a guide and explanation of the proper deployment of the AccelTex Solutions ATS-OP-245-6-4**** or
ATS-OP-245-7-6****-36. These antennas are equivalent models with different element counts.
Terms:
• 6dBi antenna refers to ATS-OP-245-6-4****-36
•
7dBi antenna refers to ATS-OP-245-7-6****-36
1.888.406.8906
info@acceltex.com
Advertisement
Table of Contents
Summary of Contents for Hubbell ATS-OP-245-6-4 Series
- Page 1 6dBi and 7dBi Antenna Deployment Introduction This is a guide and explanation of the proper deployment of the AccelTex Solutions ATS-OP-245-6-4**** or ATS-OP-245-7-6****-36. These antennas are equivalent models with different element counts. Terms: • 6dBi antenna refers to ATS-OP-245-6-4****-36 • 7dBi antenna refers to ATS-OP-245-7-6****-36 1.888.406.8906 info@acceltex.com...
-
Page 2: Table Of Contents
Contents 1. Antenna Specifications…………………………………………………………………….3 2. 3D Radiation Pattern……………………………………………………………………….4 3. Deployment Specifications……………………………………………………………….5 a. 6dBi and 7dBi Antenna Aisle Deployment…………………………..……..5 b. 6dBi and 7dBi Antenna Free Space Ceiling Deployment……………..6 c. 6dBi and 7dBi Antenna Free Space Wall Deployment…………………6 4. Additional Help and Support…………………………………………………………….7 1.888.406.8906 info@acceltex.com... -
Page 3: Antenna Specifications
1. Antenna Specifications ATS-OP-245-6-4****-36 ELECTRICAL SPECIFICATIONS Frequency Range: 2.4-2.485/5.15-5.85 GHz VSWR: ≤1.5:1, max 2.0 Gain: 6 dBi Isolation: >30 dB Polarization: Vertical Impedance: 50 Ω Horizontal Beamwidth: 105°/110° Lightning Protection: None Vertical Beamwidth: 65°/55° Max Input Power: 50 W per port MECHANICAL SPECIFICATIONS Dimensions: 11.12”... - Page 4 ATS-OP-245-7-6****-36 ELECTRICAL SPECIFICATIONS Frequency Range: 2.4-2.485/5.15-5.85 GHz Gain: 7/6 dBi Polarization: Horizontal Horizontal Beamwidth: 100°/110° Vertical Beamwidth: 59°/61° MECHANICAL SPECIFICATIONS Dimensions: 12.6” x 6.7” H x 1.38” D (320x170x35mm) Radome Material: ABS Weight: 1.5 lb (0.68 kg) Number of Leads: 6 Installation: Flush Mount to Wall or Articulating Wall Mount (included) Cable Length: 36”...
-
Page 5: D Radiation Pattern
2. 3D Radiation Patterns 1.888.406.8906 info@acceltex.com... -
Page 6: Deployment Specifications
3. Deployment Specifications When deploying 6dBi or 7dBi Antenna, there are a few main points to pay attention to. Pay close attention the beamwidths of the antennas and blue arrows on the back of the antennas that denote the orientation of the places. -
Page 7: 6Dbi And 7Dbi Antenna Free Space Ceiling Deployment
3.b. 6dBi and 7dBi Antenna Free Space Ceiling Deployment When deploying the 6dBi or 7dBi antenna in open/free space on a ceiling, use the following guidance. Depending on deployment height, the propagation of the antenna roughly resembles a rectangle when mount with the face point directly downward. -
Page 8: Additional Help And Support
4. Additional Help and Support For additional help and support, please contact us: Phone: 1.888.406.8906 Email: info@acceltex.com 1.888.406.8906 info@acceltex.com...
Need help?
Do you have a question about the ATS-OP-245-6-4 Series and is the answer not in the manual?
Questions and answers