Levenhuk DISCOVERY STAR SKY P9 PLANETARIUM Manual

Device Description

1. Timer indicator
2. NEBULA button
3. ON/OFF button
4. STAR button
5. Power input

Remote control

1. Timer button
2. Power on
3. Power off
4. Nebula brightness ▲
5. Nebula colors ▲/▼
6. Nebula speed ▼
7. Nebula speed ▲
8. Nebula brightness ▼
9. Star modes
10. Star brightness ▼ / Rhythmic breathing mode ▼
11. Star brightness ▲ / Rhythmic breathing mode ▲
12. Reset

Do not look at the light source when the device is on. This may cause PERMANENT RETINAL DAMAGE and may lead to BLINDNESS. Children should only use the device under an adult's supervision.

Getting started

Install batteries in the remote control. Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect to the AC power supply. Press the device power button on the remote control (2) or on the device body (3).

Using

Choose the right place to project an image: a plain white ceiling or wall will give the best effect. The optimal distance from the planetarium is approx. 1.5—2m. Place the device on a flat surface. Turn the light off and close the curtains to make the room dark. Wait for 5—10 minutes to let your eyes adjust to the darkness. Turn the power on and choose the desirable projection mode.

• Timer function. On the remote control, press (1) once to activate the 45-minute timer. The indicator on the body device turns blue. On the remote control, press (1) once again to activate the 90-minute timer. The indicator on the body device turns red. To turn off the timer, press and hold (1) on the remote control.
• Nebula color change. To change nebula color, press (5) on the remote control or (2) on the device body.
• Rhythmic breathing mode. The starry sky will turn on and off rhythmically in this mode. If you need to decrease or increase the star pulsation speed, press (10) or (11) on the remote control, respectively.
• Star mode change. The device has three star modes: the stars will slowly pulsate ("rhythmic breathing" mode), the stars are always on, and the stars are off. To switch between the modes, press (9) on the remote control or (4) on the device body.

Specifications

Care and maintenance

The device is suitable for indoor use only. The device is not waterproof. To clean the surface of the device, unplug the device. Use only a dry, soft cloth for cleaning. Strictly follow the instructions and do not disassemble or drop the device as it may result in a loss of functionality.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Make sure the batteries are installed correctly with regard to polarity (+ and –). Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country's laws.

Warranty

2 years. For further details, please visit our web site: www.levenhuk.com/warranty
The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Discovery.com
levenhuk.com

Documents / Resources

References

• Levenhuk lifetime warranty details | Levenhuk - best optical equipment
• Discovery Channel Shows and Articles | Discovery
• Levenhuk optical instruments store | Levenhuk - best optical equipment

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Levenhuk DISCOVERY STAR SKY P9 PLANETARIUM Manual