Gainsborough GEORGIA GB050-H User Manual page 4

Weekly cleaning of the door seal to remove any mould or grime is required to ensure
that it remains in good condition. A badly maintained seal can lead to problems in the
future.
Metal fittings, such as the door hinges and door locking mechanism, may only be
cleaned with a soft, damp, soapy cloth.
N.B. On no account should abrasive, bleach, spirit or ammonia based cleaners be
used on the bath.
Incorrect use of cleaners can damage the material surface. Surface and
material damage that occurs due to incorrect treatment is not covered by the
warranty.
IMPORTANT
When not in use the door should be left in the closed position, although not in the
fully latched closed position. This will prevent the hinges being strained whilst
stopping the seal becoming compressed over time.
ON NO ACCOUNT SHOULD PRESSURE BE PUT ON THE DOOR WHILST IN THE
OPEN POSITION.
PLEASE NOTE THERE ARE NO USER SERVICEABLE ITEMS ON THIS UNIT.
4