Memory Module - HP Compaq Presario CQ71 Maintenance And Service Manual

Memory module

Description
2048-MB (800-MHz, PC2-6400, DDR2)
1024-MB (800-MHz, PC2-6400, DDR2)
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the hard drive cover:
1. Loosen the 4 Phillips PM2.5×6.0 captive screws (1) that secure the hard drive cover to the
computer.
2. Lift the left side of the cover (2), swing it up and to the right, and remove the cover. The hard drive
cover is included in the Plastics Kit, spare part number 531859-001.
3. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The edge of the module opposite the slot rises away from the computer.)
54 Chapter 4 Removal and replacement procedures
Battery on page 47).
Spare part number
513766-001
513766-001