LTC 1909 Quick Start Manual

LTC LED 1909,2209, 2409

NEW SEARCH

1. Turn on the TV by pressing POWER on the remote control.
2. Press the SOURCE button, select ATV (Analog TV),
DVB-C (Digital Cable TV), DVB-S (Satellite) or DVB-T (Digital terrestrial TV).

DVB-T

(after step 1-2)
3. Press the MENU button on the remote control.
4. Select the channel setup and press ENTER.
5. The TV asks if you want to start Auto tuning, select OK and press ENTER.
6. The TV is now searching for channels. When the channel search
is complete the channels are automatically saved.

DVB-S

(after step 1-2)
3. Press the MENU button on the remote control.
4. Select the channel setup and press ENTER.
5. Highlight the satellite from which you want to search channels, and then press
blue button on the remote control.
6. Select search mode Default.
7. Select channel type ALL (both coded & free channels) or FREE CHANNELS.
8. Select the type of service, ALL CHANNELS (DTV + RADIO), DTV or RADIO.
9. Select the ENTER box and then press ENTER on the remote control to start
the search.
10. The TV is now searching for channels. When the channel search
11. is complete the channels are automatically saved.

DVB-C

(after step 1-2)
3. Select the country by pressing ENTER, highlight the desired country
and press ENTER.
4. Select digital auto tuning and press enter on the remote control.
5. The TV asks if you want to start Auto Search, select OK and press
ENTER on the remote control.
6. Select search mode by pressing ENTER on the remote control, select
Quick scan or full scan, then press ENTER on the remote control.
7. Select the frequency by pressing ENTER on the remote control, select
Automatic or Manual (you will have to enter your ID number yourself)
and then press ENTER on the remote control.
8. Select the network ID by pressing ENTER on the remote control,
then select Automatic or Manual (you can enter your ID number
yourself) and then press ENTER on the remote control.
9. Highlight START and press enter on the remote control.
10. The TV is now searching for channels. When the channel search
is complete the channels are automatically saved.
SMART TV
(Set WI-FI)
3. Press the button with a house on. (at the bottom of the remote)
4. Go to the bottom of the menu, select settings and then press ENTER on the remote control.
5. Network settings are highlighted so press ENTER on the remote control.
6. Go to wireless network and press enter on the remote control.
7. Select network and then press ENTER on the remote control.
8. Enter the password, and then select Finish on the keyboard and press ENTER on the remote control.
9. Highlight connect and then press ENTER on the remote control.
10. Press EXIT on the remote control to return to the main menu.