Download Print this page

NSL LEDLB-5CCT-12 Installation page 2

Led task bar

Advertisement

INSTALLATION GUIDE
INSTALLATION GUIDE
INCLUDED IN THE BOX
WARNING
WARNING
Disconnect power before installation or maintenance.
Disconnect power before installation or maintenance.
Screws (2 units)
1. Install the mounting clips in the desired position using the
screws provided. (Fig. 1)
2. Remove the plastic cover of the input connector.
LIGHTNING
3. Insert the fixture into the mounting clips. Connect the
INCLUDED IN THE BOX
power cord to the fixture's input connector. (Fig. 2).
INCLUDED IN THE BOX
4. Connect the plug in power cord to the 120V AC receptacle,
Screws (2 units)
or the hardwire power cord to the incoming 120V AC cable.
Screws (2 units)
NOTE: the hardwire connection should be done by a certi-
fied electrician.
LIGHTNING
110°
LIGHTNING
Fig.1
110°
110°
PLUG-IN INSTALLATION / INSTALLATION AVEC CORDON ENFICHABLE
HARDWIRE INSTALLATION / INSTALLATION CÂBLÉE
Connect to
120V AC power
JOINING MULTIPLE LUMINAIRES USING
JUMPER CABLES / CONNECTER PLUSIEURS
LUMINAIRES À L 'AIDE DE CORDONS DE LIAISON
Débrancher l'alimentation avant l'installation ou l'entretien.
Débrancher l'alimentation avant l'installation ou l'entretien.
Fixing Clips (2 units)
1. Installez les clips de montage dans la position souhaitée à
l'aide des vis fournies. (Fig. 1)
2. Retirez le couvercle en plastique du connecteur d'entrée.
3. Insérez le luminaire dans les clips de montage. Connectez
le cordon d'alimentation au connecteur d'entrée de
l'appareil. (Fig. 2).
Fixing Clips (2 units)
4. Connectez la fiche du cordon d'alimentation à la prise 120
Fixing Clips (2 units)
V CA ou le cordon d'alimentation câblé au câble 120 V CA
entrant.
19.5''
(50 cm)
REMARQUE: la connexion câblée doit être effectuée par
un électricien certifié.
Fig.2
19.5''
(50 cm)
19.5''
(50 cm)
JOINING MULTIPLE LUMINAIRES USING END TO
END CONNECTORS / CONNECTER PLUSIEURS
LUMINAIRES À L 'AIDE DE CONNECTEURS DE
BOUT EN BOUT
GUIDE D'INSTALLATION
GUIDE D'INSTALLATION
MISE EN GARDE
MISE EN GARDE
End to End connector (1 unit)
End to End connector (1 unit)
End to End connector (1 unit)

Advertisement

loading

This manual is also suitable for:

Ledlb-5cct-18Ledlb-5cct-24Ledlb-5cct-36Ledlb-5cct-48