Tool Shed TSASG Instructions Manual
  1. Manuals
  2. Brands
  3. Tool Shed Manuals
  4. Paint Sprayer
  5. TSASG
  6. Instructions manual

Tool Shed TSASG Instructions Manual

Airless spray gun
Hide thumbs
Table of Contents

Advertisement

Quick Links

AIRLESS SPRAY GUN
TSASG
www.thetoolshed.co.nz

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TSASG and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tool Shed TSASG

Summary of Contents for Tool Shed TSASG

  • Page 1 AIRLESS SPRAY GUN TSASG www.thetoolshed.co.nz...
  • Page 2 OPERATION MANUAL PRODUCT DETAILS PRODUCT Airless Spray Gun MODEL NO. TSASG ISTRIBUTED BY NOTE: This manual is only for your reference. Due to the continuous improvement of the ToolShed products, changes may be made at any time without obligation or notice.

  • Page 3: Table Of Contents

    OPERATION MANUAL C O N T E N T S: Specifications ............................4 Identification ............................5 General Safety ............................. 6 Service ..............................7 Specific Safety ............................. 8 Assembly ............................10 Locking Spray Gun ..........................11 Pressure Relief Procedure ......................... 11 Purging &...

  • Page 4: Specifications

    OPERATION MANUAL SPECIFICATIONS Power 230V / 1100W Flow Rate Up to 1.5 LPM Hose Length Pressure 3000psi Weight 5.9kg (spray unit) Nozzles 215, 415 & 515 NOZZLE SPECIFICATIONS Nozzle Spray Fan Width At Distance Of 100mm 300mm 200mm 300mm 250mm 300mm www.thetoolshed.co.nz...

  • Page 5: Identification

    OPERATION MANUAL IDENTIFICATION COMPONENTS & FUNCTIONS ON/OFF Switch Turns power to the sprayer on and off Suction Tube Fluid is drawn through the suction tube into the pump Fluid Section A piston in the fluid section moves up and down to create the suction that draws fluid through the suction tube.

  • Page 6: General Safety

    OPERATION MANUAL IMPORTANT INFORMATION GENERAL SAFETY GUIDELINES WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow instructions and warnings could lead to serious injury, electric shock, or fire. Save ALL warnings and instructions for future reference. WORK AREA SAFETY Ensure that your work area is kept well-lit and clean.

  • Page 7: Service

    OPERATION MANUAL POWER TOOL AND MACHINERY USE AND CARE Use the correct tool for the job. Forcing a tool to do a job it was not designed for increases the risk of accident or injury. Disconnect power tools and machinery from power or remove batteries before storing tools and machinery or making any changes or adjustments to them.

  • Page 8: Specific Safety

    OPERATION MANUAL ADDITIONAL SAFETY FOR AIRLESS SPRAY GUN GENERAL Can cause severe injury or property damage. Read all instructions and safety precautions before operating equipment. Before each use, check all hoses for cuts, leaks, abrasions, or bulging of cover. Check for damage or movement of couplings.
  • Page 9 OPERATION MANUAL HAZARDOUS VAPORS Paints, solvents, insecticides, and other materials can be harmful if inhaled or if they are to come in contact with the body. Use a respirator or mask if vapors can be inhaled. Read all instructions supplied with the mask to ensure it will provide the necessary protection.

  • Page 10: Assembly

    OPERATION MANUAL ASSEMBLY DO NOT PLUG IN THE SPRAYER UNTIL THE SETUP IS COMPLETE Tools Required for Assembly: Two adjustable wrenches 3/16” allen wrench INSTRUCTIONS 1. Thread the high-pressure hose to the spray hose port on the machine. Tighten this with an adjustable wrench.

  • Page 11: Locking Spray Gun

    OPERATION MANUAL BEFORE YOU BEGIN This section contains instructions that will be repeated throughout this manual. LOCKING THE SPRAY GUN Always lock the trigger off when attaching the spray tip or when the spray gun is not in use. The gun is locked when the trigger lock is at a 90° angle. (Perpendicular to the trigger in either direction).

  • Page 12: Purging & Priming

    OPERATION MANUAL PURGING AND PRIMING THE SPRAYER All new units are performance tested at the factory and are shipped with test fluid in the fluid section to prevent corrosion during shipment and storage. If you have already used your pump, some water or solvent used in cleaning may remain in the fluid section.
  • Page 13 OPERATION MANUAL PURGING AND PRIMING THE SPRAY HOSE 1. Unlock the spray gun and turn the PRIME/SPRAY knob to PRIME. The spray tip SHOULD NOT be attached to your spray gun when purging your spray hose. 2. Pull the trigger and aim the spray gun at the side wall of a waste container. If using oil-based materials, the spray gun must be grounded while purging.

  • Page 14: Operation

    OPERATION MANUAL OPERATION NOTE: Be sure that the paint hose is free of kinks and clear of objects with sharp cutting edges. 1. Switch the pump ON (I). Turn the PRIME/SPRAY knob to SPRAY. Turn the pressure control dial to maximum pressure (+). The spray hose should stiffen as paint begins to flow through 2.

  • Page 15: Unclogging Spray Tip

    OPERATION MANUAL UNCLOGGING THE SPRAY TIP DO NOT: DO NOT attempt to unclog or clean the tip with your finger. DO NOT use a needle or other sharp pointed instrument to clean the tip. The hard tungsten carbide can chip. If the spray pattern becomes distorted or stops completely while the gun is triggered, follow these steps: 1.
  • Page 16 OPERATION MANUAL 6. Replace the cleaned filter, tapered end first, into the gun housing. The tapered end of the filter must be loaded properly into the gun. Improper assembly will result in a plugged tip or no flow from the gun. 7.
  • Page 17 OPERATION MANUAL 6. Turn the water supply on. Turn pump ON (I). Water will go into the suction tube and out through the return tube. Let the pump run for a few minutes to allow the return tube to be flushed.
  • Page 18 OPERATION MANUAL OIL-BASED MATERIALS 1. Lock the gun and remove the spray tip assembly. Submerge suction set into a bucket with appropriate cleaning solution. 2. Place a waste container next to the original material container. Aim the spray gun into the side of the original material container and hold the trigger.

  • Page 19: Storage

    OPERATION MANUAL 5. Install gun filter tapered end first. Reassemble the spray gun. 6. Install spray tip, saddle seat, and washer. Replace the spray guard assembly. 7. Thread the spray gun back onto the pain hose. Tighten with a wrench. CLEANING THE INLET VALVE Cleaning or servicing the inlet valve may be required if the unit has priming problems.
  • Page 20 OPERATION MANUAL STARTUP 1. Remove the gun from the plastic bag and stir the water into the paint. 2. Turn the PRIME/SPRAY knob to PRIME. Plug the sprayer in and turn the switch to ON (I). 3. Turn the PRIME/SPRAY knob to SPRAY. Test the sprayer on a practice piece and begin spraying.

  • Page 21: Troubleshooting

    OPERATION MANUAL TROUBLESHOOTING / MAINTENANCE Problem Cause Solution The sprayer does not start. The sprayer is not plugged in. Plug the sprayer in. The ON/OFF switch is set to OFF. Turn the ON/OFF switch to ON. The sprayer was turned off while Turn the pressure control knob still under pressure.

  • Page 22: Parts List

    OPERATION MANUAL The spray gun will not spray. The spray tip or the gun filter is Clean the spray tip or gun filter. plugged. The spray tip is not fully in the Put the tip in the SPRAY SPRAY position. position.

Table of Contents