Removing And Installing Ink Cartridges - Epson Stylus C86 Quick Manual

Removing and Installing Ink Cartridges

Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
1. Make sure the printer is turned on (the green
but not flashing). Then open the printer cover.
2. Press and release the
The print head moves to the left, and the cartridge that needs to be replaced
stops under the
Caution:
Don't hold down the
to clean the print head.
To avoid damaging the printer, never move the print head by hand.
3. Press the ink button again.
If more than one cartridge is empty, the next cartridge moves under the
ink out mark.
If all the empty cartridges have been identified, the print head moves to
the ink cartridge replacement position, as shown on the following page.
ink button.
ink out mark. The
ink button for more than 2 seconds, or the printer will start
Removing and Installing Ink Cartridges
power light should be on,
power light begins to flash.
23