Advertisement
4
.
1
0
H
i
s
t
o
r
y
4
.
1
0
H
i
s
t
o
r
y
The history recall trend is used for history data inspecting. It is similar with main display as Figure
4-10. There is a time period display under the real time for history recall trend. The value in the recall
time period is displaied the measured value upper/lower limit. In the recall trend, the dashed lines
expressed the recall locator axis, indicating the position of current recalls which the plot point locates.
The recall displays are with stepping recall, continually recall and timer recall. It can be switched
by "
"to display the group number, "
PD
Start/end time
Curve
CH No.
Operating and displaying description:
"
"
There are : Stepping recall, continue recall and timer recall according to "recall
SET
modes" setting.
"
""
"
Move cursor on channel display mark to select recall channel.
"
"、"
"
Enable / Disable CH
"
":
ESC
"
"
ENT
"
"
"
"
r
e
c
a
l
l
r
e
c
a
l
l
Escape from recalling function back to current status.
Step: Alternate the curve localization axis for the dashed or the solid line.
In horizontal display, curve will shift to left if the axis is dashed line, or, the
localization axis shifts to left if the axis is solid line.
In horizontal display, curve will shift to right if the axis is dashed line, or, the
localization axis shifts to right if the axis is solid line.
"to change the recall modes.
SET
Figure 4-10
Model mark
Interrecord
Scale
display/hide
Partition
- 26 -
Advertisement
