Download Print this page

JVC KW-DB70AT Installation/Configuration page 2

Hide thumbs Also See for KW-DB70AT:

Advertisement

Reset the unit.
Vehicle-specific Wiring Harness
(separately purchased)
For your reference:
Metra Electronics:
www.metraonline.com
Scosche Industries:
www.scosche.com
Connecting the Bluetooth adapter or portable audio player
Make the <SRC SELECT> setting accordingly, see pages 14 and 19 of the INSTRUCTIONS.
*
1
Not supplied for this unit.
*
2
Firmly attach the ground wire to the metallic body or to the chassis of the car—to the place uncoated with paint.
*
3
Make the <L/O MODE> setting accordingly, see page 18 of the INSTRUCTIONS.
Install_KW-DB70AT_[E]_EN_002A.indd 2
Install_KW-DB70AT_[E]_EN_002A.indd 2
ELECTRICAL CONNECTIONS
Connecting the external amplifiers and/or subwoofer
REAR
SUBWOOFER
FRONT
E LINE OUT cord (supplied)
Aerial input
From Radio aerial
From DAB aerial
Factory wiring harness (vehicle)
1
Remote adapter *
Caution
Join the same color leads together.
To join the open-ends of the leads
Strip lead ends
Twist ends together
Recommended connection
Automatic antenna (250 mA max.)
Amp Turn-on (200 mA max.)
Illumination
Telephone Muting
12 V Battery
12 V Ignition Switch
Ground
Front speaker (left)
Front speaker (right)
Rear speaker (left)
Rear speaker (right)
KS-BTA100
(separately purchased
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – or – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –– – –– – – – – – – –
3.5 mm stereo mini plug *
1
Signal cord *
Rear ground terminal
10 A fuse
D Power cord (supplied)
Light Blue (yellow stripe)
Solder
Tape
Blue
Blue (white stripe)
Orange (white stripe)
Brown
Yellow
Red
Black
White
White (black stripe)
Gray
Gray (black stripe)
Green
Green (black stripe)
Purple
Purple (black stripe)
Blue (white stripe)
)
Black
Brown
1
2
FRONT :
Front speakers
JVC Amplifier
REAR :
Rear speakers or
subwoofer *
Remote lead
1
Extension lead *
Power cannot be turned on?
Ignition switch
Fuse block
Separate red lead
If your vehicle factory wiring harness
does not have "12 V ignition switch" lead,
connect the red lead of the supplied
power cord, D, to the vehicle fuse block
(through a separate red lead provided
with the fuse tap).
To the blue (white stripe) lead of the supplied power cord D
Ground
To the brown lead of the supplied power cord D
Portable audio player, etc. *
1
3
1/26/2012 1:07:46 PM
1/26/2012 1:07:46 PM

Advertisement

loading