pba 4CS.442.001U Series Quick Start Manual

ITEM
4CS.442.001U . 24 3/4"
xx
4CS.442.002U . 36 3/4"
xx
4CS.442.003U . 42 3/4"
xx
4CS.442.004U .
51 3/4"
xx

TWO-WALL GRAB BAR

Rail 1/16" (1,5 mm) thick, in type 316L stainless steel tubing with 1-17/64" (32 mm) outer diameter. Stainless steel bends
connected with 3-3/16" (Ø 80 mm) flanges.
Cover in type 316L stainless steel. Mounting flanges with steel core 1/8" (3 mm) thickness, stainless steel covers and fully
recyclable polyamide-6 wall protection. Each cover snaps over mounting flange to conceal mounting screws.
Clearance between the grab bar and wall is 1-1/2" (38 mm).
Strength. PBA 4CS Two-wall grab bars can support loads up to 661 pounds (300 kg) if properly installed.
MOUNTING KITS not included.
Optional mounting kit for concrete, natural stone, solid brick and hollow brick: KIT 4CN.0VM.0004.00.
Optional mounting kit for sheetrock wall and wooden plate: KIT 4CN.0VM.0010.00.
Optional mounting kit for toilet partition: KIT 4CN.0VM.0040.00.
One Mounting kit is required for each flange.

SAFETY WARNING

Grab bars must be firmly secured to the anchors and the wall in order for them to support the weight they are designed for.
Grab bars alone are not stronger than anchors and walls. In case the grab bar is not securely anchored to the wall, the building
owner or maintenance personnel must remove it from service to avoid any accident or injury.

SUSTAINABILITY

This product contributes to LEED credit
STAINLESS STEEL AISI 316
.XX FINISH
.44 .43
.44 SATIN
.43 BRIGHT
A B
36 3/4"
54 3/4"
54 3/4"
45 3/4"
®
35/64"
14mm
A
3-3/4"
95,25mm
2-3/4"
70mm
The illustrations and descriptions herein are applicable to production as of the date of Document.
The manufacturer reserves the right to make changes and improvements in designs and dimensions.
DESIGN FOR ALL 4CS
ADA
3-5/32"
80mm
Concealed mounting
flange in stainless steel
661 lb
300 kg
REV 01/2020
©2020 by PBA S.p.A.