Volanti Displays VD-654K-T Quick Start
  1. Manuals
  2. Brands
  3. Volanti Displays Manuals
  4. Monitor
  5. VD-654K-T
  6. Quick start

Volanti Displays VD-654K-T Quick Start

65” 10point touch
Hide thumbs
1
2

Advertisement

Table of Contents

Installation:

• Review this quick-start guide and familiarize
yourself with the monitor.
• Remove the box lid, add brackets, then continue
to unpack & mount the monitor on wall or cart.
• Connect video signal & USB touch cables to PC
or other appropriate input source.
• Connect power supply to the monitor then plug
into AC mains as final step.
Note: The monitor default is to power on when
an active video source is connected. This can be
changed through the OSD menu.

Monitor Information

• Volanti Display 65" multi-touch 4K resolution
monitor. See Input note below.
• Windows 10-point multi-touch, HID compatible
so just plug & play, no additional drivers or
software required if using Windows 8 or 10.
• Input: Use 4K, Ultra-HD (3840x2160) @60Hz for
optimal image quality. Lower resolution input will
be scaled to fill the display. The aspect ratiop of
the display is 16:9, other aspect ratios may result
in black bars on the sides, for example a 4:3
image source will result in black bars left & right.
Maintenance: Ensure inside edges of the bezel are
not obstructed.
Quick Start - Front
65" 10point Touch - P/N: VD-654K-T
www.volantidisplays.com

In the Box

The Volanti 65"touch monitor comes with:
• Volanti 65" touch monitor.
• Remote control (with batteries).
• Power supply and power cord.
• HDMI cable
• USB cable

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VD-654K-T and is the answer not in the manual?

Questions and answers

Related Manuals for Volanti Displays VD-654K-T

Summary of Contents for Volanti Displays VD-654K-T

  • Page 1 Quick Start - Front 65” 10point Touch - P/N: VD-654K-T Installation: • Review this quick-start guide and familiarize yourself with the monitor. • Remove the box lid, add brackets, then continue to unpack & mount the monitor on wall or cart.
  • Page 2 Quick Start - Back 65” 10point Touch - P/N: VD-654K-T OSD Menu Buttons Removable Removable handle handle + (increase) - (decrease) Down Connectors shown below VESA 400mm x 400mm M6 mounting screws Menu/On-Off IR sensor Power LED Power IR receiver...

Table of Contents