Page 1
M-2101-1: JBE-2101 Manual Call Point data sheet V1.0 Overview JBE-2101 is a conventional manual call point (MCP) designed to be compatible with a wide range of conventional fire panels and input modules. This MCP sets an installer-selectable resistive load to the fire loop when its resettable element is pressed.
Page 2
M-2101-1: JBE-2101 Manual Call Point data sheet V1.0 Installation Always observe local fire and electric installation regulations. Secure the base to the wall (surface or flush mounted). Identify the system’s requirement for MCP alarm level (typically 680 Ω or 470 Ω). For other alarm loads, an external resistor may be used in conjunction with the internal voltage-free switch.
Page 3
M-2101-1: JBE-2101 Manual Call Point data sheet V1.0 Resetting an activated MCP 1. Open the tab in the bottom of the MCP face. 2. Insert the reset key. 3. Rotate key counterclockwise until the frangible element returns to its position.
Page 4
M-2101-1: JBE-2101 Manual Call Point data sheet V1.0 Regulatory information 0370 Jade Bird Fire Alarm International (Europe), S.L. C. Tarragona, 157. 08014 Barcelona (Spain) DoP-0370-CPR-3804-1 EN 54-11 JBE-2101 Manual Call Point Technical file: see TF-JBE-2101-10 provided by the manufacturer. Jade Bird Fire Alarm International (Europe), S.L.