Table of Contents
Advertisement
NLTroubleshooting
Malfunction
"E:30 / -10" and/or
"E:35 / -10"
"E:30/-20"
All other error codes.
Device not working.
Program does not start.
48
Cause and Troubleshooting
If the error message appears again, please contact
4.
the service.
→
"After-sales service", page 57
Water in the bottom tray.
Close the tap.
▶
Please contact customer service.
▶
→
"After-sales service", page 57
Device leaks.
Close the tap.
▶
Please contact customer service.
▶
→
"After-sales service", page 57
Detergent dosage is too high.
▶ Immediate measure: mix a tablespoon of fabric softener
with 0.5 l of water and pour this mixture into the left
compartment (not for outdoor, sportswear and down
textiles).
Reduce the amount of detergent for the next wash
▶
with the same load.
Detergent dosage is too high.
Reduce the amount of detergent for the next wash
▶
with the same load.
Additional water filled.
▶
Do not fill the appliance with additional water during
operation.
Solenoid valve defective.
Please contact customer service.
▶
→
"After-sales service", page 57
Malfunction
Please contact customer service.
▶
→
"After-sales service", page 57
Mains plug of the power cable is not plugged in.
Connect the device to the power supply.
▶
The fuse in the fuse box has blown.
Check the fuse in the meter cupboard.
▶
Power supply has failed.
Check whether the interior lighting or other devices
▶
are working.
was not pressed.
Press .
▶
Advertisement
Table of Contents
