Canofix Eco Friendly Canopy Installation Manual
Hide thumbs
Also See for Eco Friendly Canopy:
- Installation manual (12 pages) ,
- Installation manual (8 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Canofix Eco Friendly Canopy
Summary of Contents for Canofix Eco Friendly Canopy
- Page 1 Installation Manual *Required Tools Imported and Distributed by Kims Group Inc.
- Page 2 Assembly Contents *Note : You will receive more parts if you ordered over 40” model *Extensions are included only over 48” models Attention: You are solely responsible for determining whether the handling, storage, assembly, installation or use of this product is safe and appropriate in any location or for any given application. Kims Group Inc. is not responsible for any damages or injury to you, any other person or any property resulting from the improper handling, storage, installation, assembly or use of this product, or the failure to follow Kims Group Inc.
- Page 3 How to use Anchor Bolt Use 1/2" hammer drill bit to drill Brick Wall through the brick. Drill hole to any depth exceeding minimum embedment. If you are using bolts not provided by the distributor, please use the correct drill bit accordingly. Insert the anchor bolt onto the Brick Wall bracket into the hole, so that...
- Page 4 1 Anchor the Brackets Use anchor bolt on brick wall. Or use wood screw (not included) on other surfaces such as wooden wall, studs behind sidings, etc. Use leveler to align brackets Follow the instruction on page 02, how to use anchor bolt Use wood screw on wooden wall...
-
Page 5: Top View
2 Insert the base clip frame fully Bottom 3 Mark the base clip frame to cut with pen wall Top View 4 Cut the mark with saw 5 Break the part between marks... - Page 6 6 Insert the base clip frame fully Insert fully against the wall Bottom Insert fully against the wall wall Top View Use the following...
- Page 7 Insert aluminum bars Bottom Over 48” model, use extensions between bars Use the following...
- Page 8 8 Insert the Polycarbonate Panel Remove the lm on Polycarbonate sheet before insert STEP 1 STEP 2 side view side view Use the following Remove the lm on Polycarbonate sheet before insert The transparent film side should face the bottom...
- Page 9 9 Close the brackets Align the Polycarbonate sheet and bars before bolting brackets Use the following...
- Page 10 10 Bolt on Bracket to hold bars and Polycarbonate Sheet Straighten the Polycarbonate Panel and bars before bolting the brackets Using drill/driver, screw the bracket to the support bars STEP 2 STEP 1 bottom view bottom view Use the following You won't need to use all screws in the package as extras are provided.
- Page 11 Insert edge trims Finalize with Caulking. Only use caulking certified for exterior purposes. Use the following...
- Page 12 : #13-320 Don Park Road, Markham, L3R 1J4 ON, Canada email : info@canofix.ca phone : 1-289-800-0171...