Before Operating; Stop/Clear; To Set Clock - Electrolux EW27SO60LS Use And Care Manual

12

Before operating

• Before operating your new Convection micro-
wave oven make sure you read and understand
this Use and Care Guide completely.
• Before the Convection microwave oven can be
used, follow these procedures:
1. Plug in the oven. Close the door. The oven display
will show ENJOY YOUR OVEN TOUCH CLEAR
AND TOUCH CLOCK.
2. Touch the STOP/CLEAR pad. : will appear.
3. Set clock. See below.
To set the clock
• Suppose you want to enter the correct time of
day 12:30 (A.m. or P.m.).
Step
1. Touch set clock.
2. Enter the correct time of
day by touching the
numbers in sequence.
1230
3. Touch set clock again.
E
Procedure
Touch/Display
enter tIMe
12:30
tOUCH CLOCK
12:30
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR will appear in the
display. Touch the STOP/CLEAR pad and re-enter
the time.
• If the electrical power supply to your Convection
microwave oven should be interrupted, the dis-
play will intermittently show ENJOY YOUR OVEN
TOUCH CLEAR AND TOUCH CLOCK after the
power is reinstated. If this occurs during cooking,
the program will be erased. The time of day will
also be erased. Simply touch STOP/CLEAR pad
and reset the clock for the correct time of day.
NOTE
Your Convection microwave oven can be pro-
grammed with the door open except for START,
popcorn and reheat.

Stop/Clear

Touch the STOP/CLEAR to:
1. Erase if you make a mistake during
programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.