Table of Contents
Advertisement
Quick Links
Congratulations on your purchase, and thank you for selecting the KettleKart™ from Blichmann
Engineering™. We are confident that it will provide you years of service and many gallons of
outstanding beer. This manual will familiarize you with the assembly, operation, and maintenance of
the KettleKart™.
****
PLEASE READ THOROUGHLY PRIOR TO USE FOR IMPORTANT SAFETY INFORMATION
Sections labeled "Warning" can lead to serious injury or death if not followed. Please read
Warning:
these thoroughly and understand them completely before use. If you do not understand
them or have any questions, contact your retailer or Blichmann Engineering™
(www.BlichmannEngineering.com) before use. Do NOT at ANY time operate the product
until you thoroughly read and understand these instructions!
Caution:
Sections labeled "Caution" can lead to equipment damage or unsatisfactory performance of
the equipment. Please read these sections thoroughly. If you have any questions, contact
your retailer or Blichmann Engineering™ (www.BlichmannEngineering.com) before use.
Important:
Sections labeled "Important" are critical to the proper performance and life of the product.
Blichmann Engineering, LLC 2015
For replacement parts visit blichmannengineering.com/genuine-replacement-parts
KettleKart
Modular Brewing Cart
Assembly, Operation & Maintenance
IMPORTANT!!
™
****
Advertisement
Table of Contents
Summary of Contents for Blichmann Engineering KettleKart
- Page 1 Modular Brewing Cart Assembly, Operation & Maintenance Congratulations on your purchase, and thank you for selecting the KettleKart™ from Blichmann Engineering™. We are confident that it will provide you years of service and many gallons of outstanding beer. This manual will familiarize you with the assembly, operation, and maintenance of the KettleKart™.
- Page 2 5/16 Washer 3” Caster 5/16 Split Ring Lock Washer L-Bracket 5/16-18 x 3/4" Hex Bolt 1/4-20 x 1/2” 1/4-20 Hex Hex Bolt Required Tools: 2 x 7/16” Wrenches 2 x 1/2” Wrenches Blichmann Engineering, LLC 2015 For replacement parts visit blichmannengineering.com/genuine-replacement-parts...
- Page 3 1/4-20 x 1/2” hex nuts. See Figure 2. Figure 2 Step Three: Install the four L-Brackets on the KettleKart™ using the 1/4-20 x 1/2" hex bolts and 1/4-20 x 1/2" hex nuts. The innermost hole-pattern is intended for securing a TopTier™ floor burner to the KettleKart™.
- Page 4 TopTier™ Burner Installation: Attach the TopTier™ floor burner to the KettleKart™ using the remaining 1/4-20 x 1/2" hex bolts and nuts. Align the legs of the TopTier™ floor burner with the L-Brackets and install the fasteners through the mating holes.
- Page 5 Powdered Brewery Wash or similar detergent and a scrub brush or ScotchBrite™ scouring pad to remove any heavy soil deposits. Before and after each use, inspect the KettleKart™ for wear or damage. If any of the KettleKart™ components show signs of wear or damage discontinue use and contact your Blichmann Engineering™...
- Page 6 Exploded Parts Diagram: Blichmann Engineering, LLC 2015 For replacement parts visit blichmannengineering.com/genuine-replacement-parts...
- Page 7 A. Limited Warranty Blichmann Engineering warrants to the original purchaser that this product will be free from manufacturing defects in material and workmanship for a period of one (1) year from the date of purchase by the customer. Proof of purchase is required. Blichmann Engineering’s obligation to repair or replace defective materials or workmanship is the sole obligation of Blichmann Engineering under this limited warranty.
Need help?
Do you have a question about the KettleKart and is the answer not in the manual?
Questions and answers